Clarke Devil 370P Инструкции по эксплуатации и техническому обслуживанию - Страница 6
Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и техническому обслуживанию для Нагреватель Clarke Devil 370P. Clarke Devil 370P 13 страниц. Devil quartz infra-red halogen heaters
Печатать страницу
UNPACKING AND ASSEMBLY
Before assembling, please check contents against the following list and
advise your dealer immediately if any parts are missing.
1 x Heater
2 x Halogen Lamps
1 x Frame (SP only)
2 x Saddle Supports (SP only) 2 x Handles (P only)/1 x Handle (SP only)
1 x Fixings pack
TOOLS REQUIRED
7mm, 13mm and 14mm spanners, pozidrive
(phillips) screwdriver
DEVIL 370 /371P
1. Attach the four castors to the support legs
using the 13mm nuts.
2. Attach the legs to the main body using
14mm securing bolts supplied.
3. Attach the handles to each side of the
heater body using the screws supplied.
4. Fit the halogen lamps (see page 7).
DEVIL 370SP/371SP
1. Attach the four castors to the frame
using the 13mm nuts.
2. Attach the handle to the heater body
using the screws supplied.
3. Attach the frame to the heater body
as shown in the drawing, using the
securing knobs and the plastic saddle
supports located either side of the
frame tubing.
4. Fit the halogen lamps (see page 7).
4 x Castors (2 with brakes)
2 x Support Legs (P only)
2 x Securing Knobs (SP only)
6