Clarke DEVIL 9000PTC Руководство по эксплуатации и техническому обслуживанию - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Нагреватель Clarke DEVIL 9000PTC. Clarke DEVIL 9000PTC 13 страниц. 400v electric fan heater
Также для Clarke DEVIL 9000PTC: Руководство по эксплуатации и техническому обслуживанию (17 страниц)
Печатать страницу
4. Set the mode selector to one of
the 3 settings:
• The heater will take up to three minutes to reach optimum temperature.
5. Once the room reaches the required temperature, turn the thermostat
control slowly counter-clockwise until the thermostat clicks, leave the
control in this position.
• The room temperature will be maintained at this setting. The heater will
continue to operate until the power switch is turned to the OFF position.
6. For fan only operation, turn the
power switch to the fan only
setting and set the thermostat to
its minimum setting.
7. Adjust the angle by loosening
both adjusting knobs and setting
the required angle.
8. Retighten the adjusting knobs.
9. When not in use, disconnect the
heater from the mains supply.
Store it in a safe, dry, childproof
location.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Off
Fan Only
Heat Setting 1
Heat Setting 2
8