Clarke XR80 Руководство по эксплуатации и техническому обслуживанию - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Нагреватель Clarke XR80. Clarke XR80 17 страниц. Diesel/paraffin heaters
Также для Clarke XR80: Руководство по эксплуатации и техническому обслуживанию (17 страниц)
Печатать страницу
OPERATING INSTRUCTIONS
HEATER START UP
WARNING: DO NOT START HEATER WHEN EXCESS FUEL HAS
ACCUMULATED IN THE COMBUSTION CHAMBER.
1. Make sure power switch is in the
OFF position.
2. Turn thermostat to lowest setting.
3. Plug the heater into the mains
power supply.
4. Turn the thermostat to highest
setting.
5. Start heater by setting the power
switch to the ON position.
• The switch illuminates in the ON position.
6. Adjust thermostat to desired setting.
NOTE: Heater will cycle on/off as heat is required.
HEATER SHUT DOWN
1. Set the power switch to the OFF position.
2. For extended shutdown, unplug the heater from the mains supply.
BEFORE STORAGE
• Clean the heater as described in the MAINTENANCE section.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9