Clarke 3108005 Руководство по эксплуатации и техническому обслуживанию - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Инструменты Clarke 3108005. Clarke 3108005 17 страниц. 3pc air tool kit
Печатать страницу
• Water based paints (emulsions) 10-20% water.
• Oil based paints (gloss) up to 10% thinners.
• Cellulose paints up to 50% cellulose thinners.
4. If in any doubt, contact the paint manufacturer.
5. Having mixed the paint thoroughly in a separate container, pour into the
spray gun paint container through a fine filter.
• DO NOT OVERFILL PAINT CONTAINER - never more than 3/4 full.
ADJUSTMENT OF THE SPRAY GUN
ADJUSTING THE PAINT SPRAY PATTERN
1. Set the Spray Width regulator according to the paint in use and the spray
pattern required to give either a wide, fan shaped spray pattern or a
narrow spray pattern.
• As the width of the spray is increased, paint flow will also need to be
increased.
2. You can adjust the orientation of
the fan pattern either vertically or
horizontally to suit your
requirements by turning the nozzle
side wings to the desired position.
ADJUSTING THE AIR FLOW
1. Turn the Airflow Regulator to set
the air supply volume.
• The air flow needed will vary
according to the paint in use, with thicker paints requiring more air.
SPRAYING TECHNIQUES
1. To avoid creating a vacuum, remove the vent cap from the top of the
paint container before spraying. Replace the cap to avoid spillage when
you stop.
2. Practice spraying on a piece of material with the same type of surface as
the item you wish to spray, e.g. metal for a car body panel, wood for a
piece of furniture etc.
3. Always make adjustments to the spray pattern according to the
conditions. You may need to increase the paint and air flow when using a
wider fan setting.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7