Clarke CONTRACTOR CLJ120 Руководство по эксплуатации и техническому обслуживанию - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Инструменты Clarke CONTRACTOR CLJ120. Clarke CONTRACTOR CLJ120 8 страниц. Lock jig
Печатать страницу
Thank you for purchasing this CLARKE Lock Jig
Before attempting to use the jig, please read this manual thoroughly and follow the
instructions carefully. In doing so you will ensure the safety of yourself and that of others
around you, and you can look forward to the jig giving you long and satisfactory service.
This CLARKE product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered
with in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be
returned to us without prior permission.
This guarantee does not effect your statutory rights.
Introduction
The lock jig is a self centering template used for routing out the edges of doors to
accommodate a variety of popular locks and face plates. The nesting plate is
complete with a clamping lever system which automatically positions the lock centrally
in the door and clamps the jig ready to start routing.
Once the nesting plate is in position, a range of inserts can be added depending on
the size of lock to be fitted. The inserts are used in pairs,- one for the lock body, the
other for the lock face plate.
Contents
Nesting Plate x1
Wing Screw x 2
Other equipment required, (not supplied).
Light duty router capable of plunging the depth of the lock to be fitted, also must
be able to take a 16mm guide bush.
16mm Guide bush.
12.7mm (½") Router Cutter.
CLARKE GUARANTEE
Inserts (3 pairs)
Washer x 2
Centralising Lever x 2
Rubber Grips x 4
Nylon Spacer x 2
-2-