Clarke CRT 40 Инструкции пользователя - Страница 5
Просмотреть онлайн или скачать pdf Инструкции пользователя для Инструменты Clarke CRT 40. Clarke CRT 40 6 страниц. 40-piece rotary tool kit
Также для Clarke CRT 40: Инструкции пользователя (13 страниц)
Печатать страницу
3. Sanding Band & Discs
Material
Speed
Wood
6
Steel
1
Aluminium, Brass
3
Plastic
1
4. Stainless Steel Brushes & Bristle Brush
Material
Speed
Stone, Shell
2
Aluminium, Brass
2
5. High Speed Cutter, Diamond Wheel & Drill
Material
Speed
Stone, Shell
Max
Steel
3
Aluminium, Brass
6
Plastic
1
5. Abrasive Disc
Material
Speed
Stone, Shell
Max
Steel
3
Aluminium, Brass
6
Plastic
1
8
ASSEMBLY OF COMPONENTS
1. Stand for the Rotary Tool
Screw the telescopic tube into the bracket and tighten. .
Clamp the bracket to a workbench or worktop with a maximum
thickness at 2-1/8".
Slacken the top tube by turning the black knob anticlockwise (-).
Draw the tube out to its maximum height and secure it by turning
the knob clockwise (+).
Turn the middle tube anticlockwise (-) and extend as required.
Lock in position by turning the tube clockwise (+)
The Rotary Tool may now be supported by the suspension bracket
of the stand as shown. (this suspension bracket can be turned
360
O
).
2. Assembling Accessories to the Tool
IMPORTANT: Ensure the tool is switched OFF at the mains
supply and at the tool.
•
Press down on the drive shaft locking button (2), and
hold down.
•
Undo the chuck (1) using the spanner provided.
•
insert the mandrel of the tool to be used in to the chuck
FULLY, and tighten the chuck.
3. Assembling Abrasive Discs & Grinding Stones to Mandrel
•
Mount the selected disc on to the mandrel as shown,
ensuring the two washers are in place.
DO NOT overtighten the screw
5