Clarke IT1500 Руководство по эксплуатации и техническому обслуживанию - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Инструменты Clarke IT1500. Clarke IT1500 17 страниц. Induction heater
Печатать страницу
OPERATION
SET UP
1. Evaluate the maximum size of the object to be heated and select the
appropriate heating coil.
2. Making sure the heater is not
connected to a power supply, insert
the heating coil into the heating coil
insertion ports and rotate the locking
knobs clockwise on both sides of the
heating coil to ensure that the coil is
locked in to position.
3. Connect the power plug to a
standard 230V AC outlet. The fan will
automatically start.
4. Place the heating coil to the required
position on the workpiece to be
heated, making sure it DOES NOT
touch the workpiece. Press and hold
down the red heating switch and the
LED indicator lamp will turn on and
the heater will start to heat the coil.
5. When the heated workpiece meets
the required temperature, release
the heating switch (the LED lamp will go off). Place the heater on a flat
secure area away from any flammable materials and keep the fan
working for approximately 15 minutes before unplugging the heater.
CAUTION: PLEASE SELECT AND INSTALL THE HEATING COIL IN STRICT
ACCORDANCE WITH THESE OPERATING PRINCIPLES AND PROCEDURES BEFORE IT IS
ENERGISED. AFTER THE HEATER HAS BEEN SWITCHED ON, THE HEATING COIL
9