CTM LYNG 6251635 Руководство по установке - Страница 12
Просмотреть онлайн или скачать pdf Руководство по установке для Аксессуары CTM LYNG 6251635. CTM LYNG 6251635 16 страниц.
Также для CTM LYNG 6251635: Инструкции пользователя (2 страниц)
Печатать страницу
Installation – Settings
DIP 3: Installation angle
DIP 3 Installation angle
0 - 450 (sloping
OFF
ceiling)
ON
00 (flat ceiling)
DIP 6 and 7: Timer function
The countdown starts when
the cooker is turned on. When 5
minutes of the set time are left,
the cooker guard beeps once
every 15 seconds for 5 minutes.
Pressing the control button
restarts the countdown.
DIP 8: Current measurement
NB! Turning current
measurement OFF will reduce
battery life considerably. Should
only be deactivated if an external
power supply is used.
Calibrating electricity consumption
If the yellow LED on the SOCKET comes on continuously while the hob
is OFF and does not disappear when the control button on the sensor
is pressed, the standby current to the cooker is higher than the cooker
guard's preprogrammed standby level.
In this case the level can be recalibrated to actual electricity consumption by:
1.
Holding the SOCKET's control button in until the red and green LEDs
flash – then releasing the button within two seconds.
2.
The green LED flashes three times to acknowledge the change.
NB: We strongly recommend measuring the hob's electricity consumption
in standby BEFORE doing this calibration. High electricity consumption
could be caused by a fault in the hob. Incorrect calibration in the case of
high electricity consumption can result in the cooker guard never starting
or not working as intended.
12
DIP 4 and 5: Installation height
De-
fault
DIP 4
DIP 5
OFF
OFF
ON
OFF
ON
ON
OFF
ON
DIP 6
DIP 7
ON
ON
OFF
ON
ON
OFF
OFF
OFF
DIP 8
Current measurement
Current measurement
OFF
off
ON
NB! May only be carried out
by an authorised electrician.
Installation
height
above hob
70 - 104 cm
105 - 149 cm
150 - 194 cm
195 - 210 cm
Minutes
Off
45 min.
120 min.
240 min.
De-
fault
De-
fault
De-
fault