CTP Systems dBbox2 Руководство - Страница 15

Просмотреть онлайн или скачать pdf Руководство для Испытательное оборудование CTP Systems dBbox2. CTP Systems dBbox2 17 страниц. Version 3 firmware

Personalise

More Setup MoreSetup

will be displayed when the dBbox2 is switched on. A typical use of this would be a

"this unit belongs to" message. It is important to note that when this facility has

been used it cannot be changed without return of the dBbox2 to CTP Systems. The

personalise message may also be disabled if you are concerned someone may find it

amusing to put an alternative message on your dBbox2!

If a personalise message is entered when switched on the dBbox2 will display the

message along with 'Press any key' to start the unit.

How to personalise the dBbox2

Setup

Personalise

A warning message will come up stating this cannot be undone. Press any key. Read

again, then press any key.

You are now presented with a choice of:

Exit

Disable

Start

Use the left/right keys to select as required, then press "Select".

If you select "disable" you will be presented with "You have selected to delete this

facility, Are you sure?

Using the left/right key select:

Yes

If you selected "Start" you will have a blank screen with just a down arrow. This is

the current character position. Either press up or down to select a character or move

the arrow to the right to start in the next position and so on. The left and right keys

move the arrow either way and it wraps round to the second line. It's worth planning

out 2 lines of 20 character positions before proceeding.

Personalise

No setup, back to the normal menu.

Disable the personalise facility

Start the personalization process.

No setup, not disabled, back to the normal menu.

This facility will be disabled and cannot be used in the future.

This allows you to set up a two

line message, with up to 40

characters on the display which