DirekTronik 1000Base-T Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Медиаконвертер DirekTronik 1000Base-T. DirekTronik 1000Base-T 11 страниц. Gigabit ethernet
Печатать страницуGigabit Ethernet Media Converter
Product Features
One-channel media conversion between: 1000Base-T and 1000Base-SX/LX
SFP socket for Gigabit fiber optic expansion
Fiber media allows either: Multi-mode fiber, Single-mode fiber, or WDM
Single-mode fiber
Full wire-speed forwarding rate
Front panel status LEDs
Used as a stand-alone device or with a chassis
Hot-swappable when used with a chassis
Make sure to make a connection to the TX port before make a connection to the
fiber port, a link condition will be sensed on the fiber port whenever the media
converter detects a link condition on the TX port
There are two pins on the DIP switch of the 1000Base-T and 1000Base-SX/LX
one-channel media converter:
Toggle up the pin on the left-hand side to let the fiber port auto detect
duplex mode.
Toggle down the pin on the left-hand side to force the fiber port to full duplex
mode.
Toggle
link-fault-pass-through function.
Toggle
link-fault-pass-through function.
DIP
Up (Default Setting)
switch
Left-hand
The
side
detects duplex mode
Right-hand
Disable LFPT
side
<Note> Power must be on/off after re-setting LFPT function.
The TX port auto detects duplex mode
The TX port supports auto MDIX for uplink purpose
<Note> One of the fiber ports should be forced to full duplex mode and the other fiber
port should be set to auto detect duplex mode when two 1000Base-T and
1000Base-SX/LX one-channel media converters are connected to each other via fiber
port.
6
up
the
pin
down
the
pin
fiber
port
auto
on
the
right-hand
on
the
right-hand
Down
Force the fiber port to full
duplex mode
Enable LFPT
side
to
disable
side
to
enable
LFPT:
link-fault-pass-through
function
User's Manual
the
the