CLAS HU 0185BL Руководство - Страница 8

Просмотреть онлайн или скачать pdf Руководство для Сервисное оборудование CLAS HU 0185BL. CLAS HU 0185BL 12 страниц. 25l waste oil drainer

HU 0185BL

• Keep the air hose away from heat, oil and sharp edges . Before each use, check the air hose for wear

and tear. Make sure all connections are securely fastened.

DO NOT use oil traps for purposes other than those for which they were designed.

DO NOT use oil drainers if any of the bets are damaged or missing, as this may result in failure and/

or injury.

DO NOT stand on oil drains.

DO NOT adjust or manipulate safety valves.

• DO NOT carry the drainer by the hose or remove the hose from the air supply.

DO NOT place accessories near your face (especially eyes, ears, etc.)

DO NOT allow inexperienced people to use these drainers.

• DO NOT use these oil drainers if you are fatigued or under the influence of alcohol, drugs or

intoxicating medication.

• DO NOT leave the oil drainers operating unattended.

• DO NOT direct air from the air hose towards yourself or others.

• When not in use, disconnect the oil drainer from the air supply, drain the tank and store it in a safe,

dry, childproof place.

• Dispose of all used oil in accordance with local regulations.

Warning: DO NOT pollute the environment by uncontrolled dumping of used oil.Do not extract

flammable liquids. When extracting high-temperature oils, protect your hands and face. Use this

equipment only for its intended purpose. Do not modify any component of this equipment. Never fill

the tank beyond the maximum level indicated on the dipstick.

1) Reservoir

2) Vacuum generator

3) Air inlet

4) Steel tube for oil extraction

5) Plastic sleeve

6) Handle

7) Oil discharge pipe

8) Rouex2

9) 3.5mm Dia, oil suction flow approx. 0.8L/min

(nylon probes)

10) 4.5mm Dia, oil suction flow approx. 0.8L/min

(nylon probes)

11) 6.5mm Dia, oil suction rate approx. 0.8L/min

(nylon probes)

12) 4.5mm Dia, oil suction rate approx. 0.8L/min

25L WASTE OIL DRAINER

(metal probes)

13) 6.5mm Dia, oil suction rate approx. 0.8L/min

(metal probes)

14) Air connection

15) Safety valve

16) 1/4' ball valve

17)1/2' ball valve