CLAS OM 4102 Руководство - Страница 7
Просмотреть онлайн или скачать pdf Руководство для Сервисное оборудование CLAS OM 4102. CLAS OM 4102 12 страниц. Timing tools psa/fiat 1.4-1.6-2.0-2.2 diesel
Печатать страницу
OM 4102
TIMING TOOLS PSA/FIAT 1.4-1.6-2.0-2.2 DIESEL
SAFETY
Please read these instructions carefully. Note the safe operational requirements, warnings & cautions. Use
The product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage
and/or personal injury and will invalidate the warranty.
Keep these instructions safe for future use.
• WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered
to when using tools.
• WARNING! Incorrect or out of phase camshaft timing can result incontact between valve head and piston crown
causing damage to the engine.
• Maintain tools in good and clean condition for best and safest performance.
• Ensure that a vehicle which has been jacked up is adequately supported with axle stands.
• Wear approved eye protection. A full range of personal safety equipment is available from your Sealey dealer.
• Wear suitable clothing to avoid snagging. Do not wear jewellery and tie back long hair.
• Account for all tools, locking bolts, pins and parts being used and do not leave them in or near the engine.
• DO NOT use tools if damaged.
IMPORTANT: These instructions are provided as a guide only. Always refer to the vehicle manufacturer's service
instructions, or a proprietary manual, to establish the current procedure and data.
CONTENTS
Specialised timing tool kit covering belt replacement applications on a comprehensive range of Ford/PSA 1.4,
1.6, 2.0 and 2.2HDi/TDCi common rail diesel engines. Fiat 2.0D and 2.2D JTD/Multijet common rail diesel
engines. Includes tools for adjustable crankshaft timing gear.
Kit includes engine locked warning tag.
Important: all the tools recommended in this manual for
engine timing are not included in this tool set.
SA 6211 CRANKSHAFT LOCKING PIN x2
SA 6212 CRANKSHAFT LOCKING PIN
SA 6213 CRANKSHAFT LOCKING PIN
SA 6214 FLYWHEEL LOCKING PIN +TENSION SPRING
SA 6215 FLYWHEEL PULLEY PULLER
SA 6216 TENSIONER PULLEY LOCKING LEVER
SA 6217 TENSIONER PULLEY LOCKING LEVER
SA 6218 TENSIONER PULLEY LOCKING PIN
SA 6219 TENSIONER PULLEY LOCKING PIN
SA 6220 TIMING BELT RETAINING CLIP
SA 6221 FLYWHEEL LOCKING PIN
SA 6222 FLYWHEEL LOCKING PIN