Lenovo ThinkStation P700 Мануалы по конфигурации - Страница 9

Просмотреть онлайн или скачать pdf Мануалы по конфигурации для Настольный компьютер Lenovo ThinkStation P700. Lenovo ThinkStation P700 15 страниц. How to create and configure raid arrays
Также для Lenovo ThinkStation P700: Конфигурация оборудования (35 страниц), Руководство по конфигурации (49 страниц), Руководство по безопасности, гарантии и настройке (2 страниц)

E.) Nvidia Quadro GPU monitor connectivity:

The Nvidia Quadro K4200 graphics card has a single DVI port and two Display-Port ports. All 3

ports can be used simultaneously.

The Nvidia Quadro K5200 graphics card has a two DVI ports and two Display-Port ports. All 4

ports can be used simultaneously.

(Important: Display-ports are not HDMI ports; at first glance they do look very similar to HDMI

ports)

For dual monitor connectivity:

1. Use 2 DVI ports on the K5200

2. Use the DVI port and one Display-Port (Display-Port connection can be native display-port to

monitor via display-port connection, or use the display-port-to-DVI-adapter supplied with the

system to connect to a native DVI monitor).

3. Or use two Display-Ports

F.) Serial Port Deck Control

The Lenovo P700 workstation does have an embedded serial port. The embedded serial-port has

been qualified by Avid and will maintain frame accuracy in Avid environments. Primary or secondary /

additional serial port deck control can be established via two methods (both of which have been

qualified by Avid and will maintain frame accuracy in Avid environments)

1. Addenda model

connects directly from a USB port to the RS422 port of a deck.

http://www.addenda.com/addenda-elect/products/rsUSB4.php

2. Combination of a Keyspan (Tripp-Lite) Model USA-19HS USB-to-serial-port adapter with

Addenda Rosetta Stone model RS – 2/8 RS232-to-RS422 converter

Keyspan (Tripp-Lite) Model USA-19HS (AVID P/N 7080-20013-01)

http://www.tripplite.com/en/products/model.cfm?txtSeriesID=518&EID=13384&txtMode

lID=3914

Addenda Rosetta Stone (or equivalent) model RS – 2/8 RS232-to-RS422

converter (AVID P/N 7070-00507-01)

http://www.addenda.com/addenda-elect/products/rs28.php

To connect the Keyspan 19HS / Addenda RS -2/8 combination:

Install the Keyspan 19HS driver before plugging the device into USB port.

Once the Keyspan 19HS driver is installed then plug the Keyspan 19HS into a USB port.

The Keyspan 19HS will now show up in device driver.

Using a serial cable, connect the 9-pin serial port of the Keyspan 19HS USB adapter

to the port of the Addenda marked RS232 from PC

Using a 2

deck control

serial port of the deck.

(Requires monitors with native display-port connections)

RS-USB / 4 direct USB-to-RS422 serial adapter. This is a simple device which

serial port cable connect the port of the Addenda marked "RS422 to VTR" to the

Page 9 of 15

– Avid Technology – Dec 24th, 2014

Dave Pimm

Rev A