Lenovo ThinkStation P900 Руководство по конфигурации - Страница 19

Просмотреть онлайн или скачать pdf Руководство по конфигурации для Настольный компьютер Lenovo ThinkStation P900. Lenovo ThinkStation P900 49 страниц. How to create and configure raid arrays
Также для Lenovo ThinkStation P900: Конфигурация оборудования (35 страниц), Руководство по безопасности, гарантии и настройке (2 страниц)

Legacy BIOS Method – Setting up single drives in JBOD mode

***Note: in order for the OS to recognize drive(s) attached to the Avago controller, the drive(s) must be

configured as a RAID array or JBOD mode. Single drive RAID 0 arrays are acceptable.

Use this method to create a basic single drive using the Avago MegaRAID SAS/SATA FLEX RAID Adapter

or Avago 9364-8i adapter with the system BIOS set to Legacy mode.

1. Install the desired drives and Avago controller into the system (see "P500-P700-P900 RAID

Hardware Configuration" document for installation instructions).

2. Power on the system and wait for the Avago option ROM to load. Press CTRL + R when

prompted to enter the Avago MegaRAID configuration utility.