Lenovo 12NA-GAR1-WW Руководство пользователя - Страница 16

Просмотреть онлайн или скачать pdf Руководство пользователя для Монитор Lenovo 12NA-GAR1-WW. Lenovo 12NA-GAR1-WW 50 страниц.

Connecting cables

After assembling your monitor, you must connect cables correctly to use the monitor and

computer. Your monitor can be used with either the Tiny installed in the monitor or an

external desktop/laptop computer. To connect cables, do one of the following:

1. If you use the Tiny installed in the monitor, connect the ac power adapter cable and

2. Use a DisplayPort cable of this type as shown. Connect one end of the DisplayPort

3. Use a type A-to-type B USB cable as shown. Connect type B connector of this cable to

1-11 Flat Panel Monitor User's Guide

power cord that comes with the monitor. First connect the ac power adapter cable to the

ac power adapter connector on the monitor.Then, connect one end of the power cord to

the ac power adapter and the other end to a properly-grounded electrical outlet.

Note: When installing the computer to the TIO monitor for AIO mode, ensure you use

the power adapter that comes with the computer when computer power adapter large

than 90W, otherwise please use TIO power adapter.

cable to the DisplayPort connector on the monitor and the other end to a DisplayPort

connector on the computer. To locate the DisplayPort connector on the monitor, see

"*ThinkCentre M90n-1 supported MTs list:"on page 1-3.

the USB 3.0 upstream connector on the monitor. Then, connect type A connector of the

cable to a USB connector on the computer. To locate the USB 3.0 upstream connector

on the monitor, see "*ThinkCentre M90n-1 supported MTs list:"on page 1-3.