Lenovo 2985EVU Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Планшет Lenovo 2985EVU. Lenovo 2985EVU 44 страницы. Brochure
Также для Lenovo 2985EVU: Технические характеристики (4 страниц)

Печатать страницу

Electrical current safety information

Electric current from power, telephone, and communication cables is hazardous.

To avoid a shock hazard:

v Do not use your computer during a lightning storm.

v Do not connect or disconnect any cables or perform installation, maintenance, or

v Connect all power cords to a properly wired and grounded electrical outlet.

v Connect to properly wired outlets any equipment that will be attached to this

v Whenever possible, use one hand only to connect or disconnect signal cables.

v Never turn on any equipment when there is evidence of fire, water, or structural

v Disconnect the attached power cords, battery pack, and all the cables before you

v Do not use your computer until you have closed the cover. Never use the

v Connect and disconnect cables as described in the following procedures when

To connect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlets.

5. Turn devices ON.

The power cord must be disconnected from the wall outlet or receptacle before

installing all other electrical cables connected to the computer.

The power cord may be reconnected to the wall outlet or receptacle only after all

other electrical cables have been connected to the computer.

ThinkPad X201, X201s, and X201 Tablet Service and Troubleshooting Guide

DANGER

reconfiguration of this product during an electrical storm.

product.

damage.

open the device covers, unless instructed otherwise in the installation and

configuration procedures.

computer when the cover is open.

DANGER

installing, moving, or opening covers on this product or attached devices.

To disconnect:

1. Turn everything OFF.

2. First, remove power cords from

outlets.

3. Remove signal cables from

connectors.

4. Remove all cables from devices.