CTS FWRIII-3105 SERIES Руководство пользователя - Страница 11
Просмотреть онлайн или скачать pdf Руководство пользователя для Шлюз CTS FWRIII-3105 SERIES. CTS FWRIII-3105 SERIES 15 страниц. Residential gigabit ethernet managed fiber gateways
Печатать страницу2.3 Installing the WLAN Residential Gateway
CAUTION
To prevent any damage or failure of the WLAN Residential Gateway, please
DO NOT block the ventilation FAN holes.
Use the following guidelines when choosing a place to install the Residential
Gateway:
Firm and steady flat surface.
The location of power outlet should not be far away from the device.
Make sure that there is proper heat dissipation from and adequate
ventilation around the switch. Do not place heavy objects on the
WLAN Residential Gateway.
Make sure water and moisture cannot enter the case.
Keep the cabling away from electrical noise.
2.4 Powering ON
The WLAN Residential Gateway can be used with AC power adapter 100-240
VAC Input and 12VDC output. The input connector is located on the left panel of
the WLAN Residential Gateway. Before turning on the WLAN Residential
Gateway, please make sure that network cables, and power cables are securely
connected.
Procedures:
1. Plug one end of the power adaptor into the power jack on the left
panel.
2. Plug the other end of the power adaptor into the power outlet. After
the power is on, the Power LED indicator should light in green.
Power Failure
In the event of power failure, unplug the power that is plugged into the
Residential Gateway at the left of the device. When power is resumed, plug the
power back to the Residential Gateway. Please note that the WLAN Residential
Gateway has no Power ON/OFF Button. Therefore, the only way to power on or
power off the Residential Gateway is to connect or disconnect the power
adaptor.
11