Lenovo IdeaCentre K320 Руководство по замене оборудования - Страница 21

Просмотреть онлайн или скачать pdf Руководство по замене оборудования для Сотовый телефон Lenovo IdeaCentre K320. Lenovo IdeaCentre K320 37 страниц. Personal systems reference lenovo ideacentre desktops
Также для Lenovo IdeaCentre K320: Руководство пользователя (43 страниц), Справочное руководство (49 страниц), Краткое руководство по эксплуатации (16 страниц)

Replacing the heat sink assembly

Attention:

Do not remove the computer cover or attempt any repair before reading the

"Important safety information" in the Safety and Warranty Guide that was

included with your computer or in the Hardware Maintenance Manual (HMM)

for the computer. To obtain copies of the Safety and Warranty Guide or

HMM, go to the Support Web site at: http://consumersupport.lenovo.com

To replace the heat sink assembly:

1. Remove the computer cover. Refer to "Removing the computer cover".

2. Lay the computer on its side.

3. Locate the heat sink. Refer to "Identifying parts on the system board".

4. Disconnect the heat sink and the fan assembly cable from the system board.

5. Remove the four screws

system board.

6. Lift the failing heat sink and fan assembly off the system board.

7. Use the thermal grease syringe to place five drops of grease on the top of the

microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the

grease syringe).

Hardware Replacement Guide

31041595_K3_HRG(H57)_EN_V3.0.ind18 18

securing the heat sink and fan assembly to the

2009.11.17 10:54:28 AM