Nikon Z 7II Руководство по обновлению прошивки - Страница 13
Просмотреть онлайн или скачать pdf Руководство по обновлению прошивки для Цифровая камера Nikon Z 7II. Nikon Z 7II 14 страниц.
Печатать страницу
D
Troubleshooting
Try the solutions listed below if you experience any of the following when
using an ML-L7 remote control.
•
[Wireless remote (ML-L7) options] cannot be selected in the setup
menu and the camera cannot be paired with the remote control:
- Check that the camera battery is charged or use an optional charging
AC adapter or an optional power connector and AC adapter.
- Confirm that [Disable] is selected for [Airplane mode] in the setup
menu.
- The remote control cannot be used while the camera is connected to
a computer or smart device via USB. End the USB connection.
•
The camera does not respond to the remote control:
- The camera and remote control are not connected. To connect, press
the remote control power button. If L does not appear in the shooting
display, pair the camera and remote control again.
- Confirm that [Enable] is selected for [Wireless remote (ML-L7)
options] > [Wireless remote connection] in the setup menu.
- Confirm that [Disable] is selected for [Airplane mode] in the setup
menu.
- The remote control cannot be used while the camera is connected to
a computer or smart device via USB. End the USB connection.
- Simultaneous wireless connections with both remote control and a
computer or smart device are not supported. If you end the
connection to the remote control by connecting to a computer or
smart device, the connection can be re-established by selecting
[Enable] for [Wireless remote (ML-L7) options] > [Wireless remote
connection] in the setup menu.
13