Nikon Nivo 3.C Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измерительные приборы Nikon Nivo 3.C. Nikon Nivo 3.C 32 страницы. Hardware
Печатать страницу
C
WARNING –
with the instructions. Charging or using the battery in unauthorized equipment can cause an
explosion or fire, and can result in personal injury and/or equipment damage.
To prevent injury or damage:
– Do not charge or use the battery if it appears to be damaged or leaking.
– Charge the Lithium-ion battery only in a product that is specified to charge it. Be sure to
follow all instructions that are provided with the battery charger.
– Discontinue charging a battery that gives off extreme heat or a burning odor.
– Use the battery only in equipment that is specified to use it.
– Use the battery only for its intended use and according to the instructions in the product
documentation.
Laser Safety
2.C
Nivo
is a Class 3R Laser Product in accordance with: IEC60825-1, Am2 (2001):
"Safety of Laser Products"
Use of the Laser Class 3R equipment can be dangerous.
3.C
Nivo
/Nivo
(2001): "Safety of Laser Products"
Precautions: To counteract hazards, it is essential for all users to pay careful attention
to the safety precautions and control measures specified in the standard IEC60825-1
(2001-08) resp. EN60825-1:1994 + A11:1996 + A2:2001, within the hazard
distance *); particularly on to "User's Guide".
C
WARNING –
operate the laser equipment.
C
WARNING –
warning sign.
C
WARNING –
without an optical instrument, into the beam.
C
WARNING –
should in all cases be terminated if the hazardous beam path extends beyond the limit (
distance
reasons of protection from laser radiation.
C
WARNING –
practicable.
Charge and use the rechargeable Lithium-ion battery only in strict accordance
5.C
is a Class 2 Laser Product in accordance with: IEC60825-1, Am2
Only qualified and trained persons should be assigned to install, adjust and
Areas in which these lasers are used should be posted with an appropriate laser
Precautions should be taken to ensure that persons do not look directly, with or
The laser beam should be terminated at the end of its useful beam path and
*) of the area in which the presence and activities of personnel are monitored for
Laser beam path should be located well above or below eye level wherever
Total Station Nivo Series Instruction Manual
Safety
hazard
vi i