Armstrong FUSED DISCONNECTS Руководство по установке и эксплуатации

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Водяной насос Armstrong FUSED DISCONNECTS. Armstrong FUSED DISCONNECTS 6 страниц. Envelope pumps ul r ated 30a & 60a

Печатать страницу

FUS E D DISCO N N EC T S FO R USE WITH DE SIGN

ENVELO PE PUMP S

I N S TA L L AT I O N A N D O P E R AT I N G I N S T R U C T I O N S

1.0 fused disconnect for design envelope

pumps 1-10hp

2.0 fuse disconnect dimensions

3.0 mounting instructions

4 .0 conduit/cables termination

hazardous voltage warning

• This equipment must be installed and serviced only

by qualified electrical personnel

• Disconnect all power input to this equipment before

working on or inside the equipment

• Always use a properly rated voltage sensing device

to confirm power is OFF.

• Always maintain electrical clearances between con-

duit and live parts

Failure to follow these instructions may result in serious injury, or death.

1.0 fused disconnect for design

envelope pumps 1-10hp

This document contains specific information regarding the

safe installation, operating and maintenance of Armstrong

loose fused disconnects and should be read and understood

by installing, operating and maintenance personnel. The

equipment supplied has been designed and constructed to

be safe and without risk to health and safety when properly

installed, operated and maintained. The instructions following

must be strictly adhered to. If clarification is needed on

any point please contact your Armstrong Fluid Technology

representative, quoting the equipment serial number. The

product should be installed and used by professional personnel

with the appropriate equipment.

Disconnects are shipped within the pump package, as a

kit, including factory installed fuses, sized for the motor

design power.

30a

U L R ATED 3 0A & 6 0A

60a

5 .0 wiring instruction

6.0 disconnect switch and fuse ratings

7.0 operation

8.0 padlocking of the fused disconnect

9.0 environmental limits

2.0 fuse disconnect dimensions

30a disconnect

knock-outs

2×ø25/ø32+ø16

on the top and bottom

and ø25 on the base

144 mm (5.67 inch)

131 mm (5.16 inch)

30 - 60a disconnect

203 mm

(8 inch)

254 mm

(10 inch)

152 mm

(6 inch)

File No: 100.8130

Date: january 31, 2019

Supersedes: 100.8130

Date: may 14, 2018

131 mm (5.16 inch)

96 mm

(3.78 inch)

203 mm

(8 inch)

273 mm

(10.75 inch)