Dirty Hand Tools 106779 Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Газонокосилка Dirty Hand Tools 106779. Dirty Hand Tools 106779 12 страниц. 21 inch

Filling with Gasoline and Oil

ADD OIL BEFORE STARTING THE ENGINE

The lawn mower is shipped without fluids installed.

Keep the caps on the fuel and oil fills until you are ready to pour

either gasoline or oil into the correct fill.

Please refer to your Engine Owner's Manual for detailed

information on oil quantity and cold temperature oil specifications.

1. Place the machine on a level surface and initially add 1/2 of

the SAE 30 high detergent oil into the oil fill and wait one (1)

minute for the oil to settle.

2. Check the dipstick and continue adding a few ounces of oil at a

time, rechecking the dipstick until the oil reaches the fill mark.

Be careful not to overfill.

3. Fill the fuel tank with fresh, unleaded gas (min. 85 Octane),

to 1/4" from the top of the fill neck to allow for expansion. Be

careful not to overfill and reinstall the cap before starting the

engine.

ALWAYS FILL THE TANK WITH

ENGINE OFF AND COOL.

ALWAYS CHECK THE OIL LEVEL

BEFORE OPERATING.

Allow the engine to cool for at least two minutes before removing

the fuel cap.

Before performing any adjustments or any other procedure or

inspection, stop the engine, wait five minutes to allow parts to

cool. Disconnect the spark plug wire, keeping it away from the

spark plug. Contact with internal rotating parts will cause serious

personal injury. Never put hands, face, feet, or clothing under the

mower deck or discharge opening at any time.

WARNING