BlackWing CT4-V Руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Автомобильные аксессуары BlackWing CT4-V. BlackWing CT4-V 6 страниц.

Печатать страницу

2. SEASON THE BRAKES

BRAKE BURNISH PROCEDURE

Models: CT4-V Blackwing, CT5-V Blackwing

1. From a stop, accelerate as rapidly as possible without activating traction control to a speed of 60mph.

2. Using the G-Force Gauge in the HUD display, use enough pedal force to completely stop the vehicle in four to five seconds. If ABS activates,

braking is too hard.

3. Repeat the first two steps 20 consecutive times, this should take about five minutes.

4. After completing the 20 stops, cool the brakes by driving for 5mi at 60mph.

Please note: During the burnishing procedure, the brake pads will smoke and produce an odor. The braking force and pedal travel may increase. After the procedure is complete, the

brake pads may appear white at the rotor contact.

BRAKE COOLING PREPARATION

Model: CT4-V Blackwing, CT5-V Blackwing

Prior to any track event, high speed driving event, or competitive driving, complete the following:

Ensure all the brake cooling parts are correctly secured and installed.

Inspect and replace and deflectors that have damage.

Inspect for blockage in the front brake cooling duct prior to every event.

Remove front tire deflector (if equipped).

If improved brake cooling is desired on Blackwings with cast-iron brakes (JGH) install the ball joint protector front shield, remove both upper

and lower rear rotor shields, and install the rear lower control arm cooling deflectors per the instruction in the brake cooling kit.

For full details on how to install, see the Owner's Manual (pages 194-195).

CONTINUED