Cub Cadet 221 HP Руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Снегоуборщик Cub Cadet 221 HP. Cub Cadet 221 HP 20 страниц. Single stage snow thrower
Также для Cub Cadet 221 HP: Брошюра и технические характеристики (2 страниц), Руководство по эксплуатации (20 страниц), Технические характеристики (2 страниц)
Печатать страницу
Controls & Features
Chute Assembly
Auger
NOTE: This Operator's Manual covers several models. Snow
thrower features may vary by model. Not all features in this
manual are applicable to all snow thrower models and the snow
thrower depicted may differ from yours.
NOTE: All references to the left or right side of the snow thrower
are from the operator's position. Any exceptions will be noted.
Headlight (Model 221 LHP)
The headlight is located on the upper center of the control panel
and is on when the snow thrower is running.
Recoil Starter Handle
The recoil starter handle is used to manually start the engine.
EZ Chute (Model 221 HP)
The rotation of the chute is controlled by rotating the chute control
handle left or right. The angle/distance that snow is thrown is
changed by manually tilting the upper chute to the desired position.
Shave Plate
The shave plate maintains contact with the pavement as
the snow thrower is propelled, allowing snow close to the
pavement's surface to be discharged.
10
Chute Tilt Control
Recoil Starter Handle
Shave Plate
Headlight
Model 221 LHP Shown
Chute Tilt Control (Model 221 LHP)
The chute tilt control is located to the right of the control panel
and controls the angle/distance that snow is thrown. Pull back
on the chute tilt control to increase the angle/distance and push
forward to decrease the angle/distance.
Chute Rotation Control (Model 221 LHP)
The chute rotate control is located in the center of the control panel
and controls the direction snow is thrown. Depress the button and
rotate the chute rotation control to the right to turn the chute to the
right and rotate to the left to turn the chute to the left.
Auger
When engaged, the auger rotation draws snow into the auger
housing and throws it out the discharge chute. Rubber paddles
on the auger also aid in propelling the snow thrower as they
come in contact with the pavement.
Auger Control
Located on the upper handle, the auger control is used to engage
and disengage drive to the auger. Squeeze the control against the
upper handle to engage the auger; release it to disengage.
4
Auger Control
Chute Rotation Control