Cub Cadet 221 LHP Руководство по эксплуатации - Страница 14

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Снегоуборщик Cub Cadet 221 LHP. Cub Cadet 221 LHP 20 страниц. Single stage snow thrower
Также для Cub Cadet 221 LHP: Брошюра и технические характеристики (2 страниц), Руководство по эксплуатации (20 страниц), Технические характеристики (2 страниц), Руководство по эксплуатации (20 страниц)

Engine

Refer to the Engine Operators manual packed separately with

your snow thrower for maintenance and adjustment information

on your engine.

To access the oil drain and spark plug it is necessary to

remove the lower panel.

Remove the three screws that secure the lower panel.

Remove the lower panel by lifting up on the panel to free

the tabs at the bottom of the panel from the tab slots and

then pull back. See Figure 6-3.

NOTE: The bottom of the panel has tabs that help hold it in

place.

NOTE: An oil drain extension kit is available separately.

Contact your local Cub Cadet dealer or contact Cub Cadet's

Customer Support for kit #753-06684.

Change the oil and/or the spark plug as instructed in your

Engine Operator's manual.

Re-install the lower panel by placing the tabs in the tab

slots, lifting the panel into place and secure with the three

screws removed in step 2.

Tip the snow thrower back to the operating position and pull

the starter handle a few times to see if it is difficult to pull.

If the starter is difficult to pull, remove the spark plug and

pull the handle several times to ensure that any oil trapped

in the head is removed.

CAUTION:

when it is removed and the starter handle is pulled.

Inspect the spark plug. If it is wet, clean off any oil before

re-installing.

6 — M

ection

aintenance

Figure 6-3

Oil may come out of the spark plug hole

& a

djuStMentS