DISCO DAD321 Руководство по обслуживанию данных - Страница 20
Просмотреть онлайн или скачать pdf Руководство по обслуживанию данных для Пила DISCO DAD321. DISCO DAD321 20 страниц. Automatic dicing/cutting saws
Также для DISCO DAD321: Руководство по техническому обслуживанию (20 страниц)
Печатать страницу
- 1. Read Carefully before Using this Manual
- 2. Introduction
- 2. Table of Contents
- 3. Contents
- 4. C. General Description of Data Screen
- 5. Important Safety Information
- 5. General Safety Precautions
- 5. Safety Precautions to be Observed During Operation
- 5. Inherently Hazardous Areas and Ways to Avoid Hazards
- 5. EMO Switch
- 5. Operations
General safety precautions (Continued)
- Proper installation of safety device
- Air exhaust, water drainage and contamination control
- Exhaust sampling port
[321/351/361]
[341/381]
If the covers or other parts with safety interlocks are broken,
immediately stop the machine and repair broken devices.
Since harmful substance may be generated depending on the
cutting work type and machining characteristics, air exhaust, water
drainage and contamination control/disposal must be properly
completed in compliance with applicable environmental protection
codes.
The machine requires an exhaust operation. When measuring the
exhaust for the machine to fulfill legal requirements, use the
sampling port, which is provided at the location indicated below.
(connection port: Rc (PT) 1/8 female)
N O T I C E
[A]
View [A]
Duct
Sampling port
[Rc(PT)1/8 female]
Sampling port
[Rc(PT)1/8 female]
Duct
A-3