Armytek Partner C1 Pro Руководство пользователя - Страница 2
Просмотреть онлайн или скачать pdf Руководство пользователя для Фонарик Armytek Partner C1 Pro. Armytek Partner C1 Pro 2 страницы.
Также для Armytek Partner C1 Pro: Руководство пользователя (2 страниц)
Печатать страницу
Specifications
Amazing brightness and extreme beam distance in four different sizes and with various power sources.
§
TIR-optics for smooth light beam and no «tunnel vision» effect even after continuous use.
§
Additional side button for comfortable one-hand operation.
§
Solid and impact-resistant body ensures the flashlights' efficiency even after the fallings from the height of 10 meters.
§
The highest standard of water- and dustproof IP68 – submersion to the depth up to 10 meters.
§
Compact size and small weight perfect for constant carrying in the bag, pocket or on the belt.
§
Compatible with original remote switches and weapon mounts.
§
Warning Indication of low battery level and real-time temperature control.
§
All manuals and user guides at all-guides.com
The flashlight has 2 buttons. Tactical button (in the tailcap) switches the flashlight on/off. Side button changes the modes only.
Half Press & Hold (no click)
1/2
Click x1
Press & Hold
Half Press & Release (no click)
1/2
Low Battery Indication
Warning
< 25%
Digital Light Stabilization & Safe Soft-Start System monitors battery voltage, starts the flashlight at an admissible brightness or
decreases it by steps when the voltage dramatically fall down. These actions increase runtime, use all available energy, get longer
lifetime of rechargeable battery and protect it from overdischarge or overheating.
Warning indication shows the battery level and the temperature inside the flashlight.
Low battery level. When it is < 25%, the color LED will show the warning level – flashing in orange color once in 2 second. With a further
voltage reducing brightness will start to decrease in steps for safety of the battery and user. If the brightness will be <25% from nominal
value, the main LED will flash 2 times ONCE. Critical battery level <10% is red indicated once a second.
High temperature (for Partner C2/C4 Pro only). When it increases to the warning level – the color LED flashes by orange 3 times once in
2 seconds. At critical level it flashes by red 3 times once in 1 second, brightness starts to reduce. After cooling down the brightness
increases to usual level.
Operation
Momentary on
Momentary on. The flashlight is switched on by half-pressing of
Release
tactical button and stays active till the button is released. It is
suitable for giving signals by short button pressings. Click the
ǁ
button to switch the light on permanently.
Cycling through modes. To switch the mode click the side
button.The modes switch cyclically: Firefly – Main1 – Main2 –
Main3 – Turbo.
ON
OFF
Strobe:
When the flashlight is ON (at any permanent light mode) press
Cycling through modes
and hold the side button to turn on the last used Strobe mode.
Firefly
Press and hold the side button again. The modes switch
cyclically: Strobe1 – Strobe2.
Turbo
Main1
To switch to the last used permanent light mode click the side
Main3
Main2
button once.
How to change Turbo1 & Turbo2:
There are two Turbo modes. You will use only one, but can
Strobe
select which one. Turbo2 is boost mode for maximal brightness
Press & Hold
and set by default. Turbo1 is constant brightness mode (more
Strobe1 в Strobe2
powerful than Main modes). Half press & release the button
ON
(without click) at least 15 times. The flashlight must be
гд
Click x1
switched on at the end of these actions.
Strobe
times to show the number of Turbo chosen.
Strobe в Last used mode
Automemorizing. After switching off the last used Mode is
memorized for quick 1-click access at next switching on.
How to change Turbo1 & Turbo2
Lock-out function. Unscrew the tailcap to 1/4 for the protection
from accidental switching on. State Indication will be turned off.
Constant light. Powerful electronics provide constant
brightness even in the Turbo1 mode, using all energy of the
x15
battery. And the Turbo2 mode gives the maximum brightness
as the Overboost technology in cars, but until temperature of a
flashlight and a discharge current of the battery don't exceed
critical values.
High Temperature Indication
Active temperature control (for Partner C2/C4 Pro only). The
flashlight can heat up in Turbo mode quickly. When the
Critical
Warning
Critical
temperature become +60ºC
small steps. After cooling-down (provided that battery voltage
is sufficient) the brightness increases to the Turbo mode again.
This stepping goes cyclically to maintain the user's safety and
the flashlight's functionality. In conditions of good air-cooling
the flashlight delivers light without stepping down even in Turbo
2sec
1sec
2sec
1sec
mode. There are no preset timers for stepping, but real-time
active temperature measurements.
< 10%
WARM
HOT
–
The light will flash 1 or 2
–
the brightness decreases by