Armytek Optoelectronics Barracuda Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Фонарик Armytek Optoelectronics Barracuda. Armytek Optoelectronics Barracuda 2 страницы.

Печатать страницу

Set description

Barracuda

Items included in the package:

1 - Flashlight

6 - Lanyard

2 - Body 1x18650

7 - 2 spare O-rings

3 - 2 rubber rings

8 - Spare rubber button

4 - Rubber grip

9 - User manual

5 - Holster

Depending on the model, your flashlight can inconsiderably differ from the pictures in the manual.

The producer reserves the right to change the package at his own discretion without modifying this manual.

Initial Service

To set/replace batteries:

1. Unscrew the tailcap.

2. Place the batteries with the positive contact (+) facing the head of the flashlight.

3. Adjust the tailcap and tighten it as far as it can go.

We recommend NOT to leave power sources inside the flashlight for a long storage period, as batteries (especially, non-rechargeable) can leak

for various reasons and damage the inner parts of the flashlight. If you want to keep your flashlight in a stand-by state with batteries in, use new

and quality batteries, store the flashlight in acceptable for batteries operational temperature and revise the batteries' state at least once a

month. If you have noticed any signs of batteries' defects, withdraw them from the flashlight and take out of operation. It is also recommended

to replace discharged batteries with new ones before the storage as the chance of leakage is higher with discharged batteries.

The flashlight has several operational variants:

Maximum— permanently switched light at Maximum mode (activated by click with the head of the flashlight tightened up). It's

an easy and comfortable operational mode for Hunters, especially when the flashlight is used with a remote switch.

Additional — permanently switched light at one of the Additional modes at user's choice (activated by click with the head of the

flashlight unscrewed to 1/8). Additional modes: Firefly, Main1, Main2, Main3, Strobe (hidden).

Tactical — any mode switched on by half-pressing of the button and active till the button is released. In Maximum mode suitable

for giving signals by short button pressings. In Additional mode quick half-pressings can be used to switch modes.

Maximum

Tighten up

Click x1

Additional

Unscrew to 1/8

Click x1

Cycling through Additional modes

Click x2

Firefly

Strobe

Main1

Main3

Main2

* If enabled

Adding Strobe to Additional modes

Additional вTighten up & Unscrew x3

Maximum вUnscrew & Tighten up x3

Tactical

Half Press & Hold (no click)

Release

1/2

OFF

Automemorizing. After switching off the last used Mode is memorized for quick 1-click access at next switching on.

Lock-out function. Unscrew the tailcap to 1/4 for the protection from accidental switching on.

Low Battery Indication.

When it is <10%, the LED flashes 2 times ONCE. If you are not sure if it flashed or not switch the

flashlight off and on: in case the battery is low flashes will be repeated. At critical level light output decreases to Firefly mode.

Operation

Maximum:

1. Tighten the head of the flashlight if it is unscrewed.

OFF

2. First full click of the button turns the light on.

гд

3. Second full click turns it off.

Max

Additional (Firefly + 3 Main modes + Strobe (if enabled)):

1. If the head of the flashlight is tightened up, unscrew it for

1/8 of a circle.

2. First full click of the button turns the light on at the last

used Additional mode.

OFF

Cycling through Additional modes:

гд

1. To switch the mode turn the flashlight off and on (either

Last

mode

by full click or half-pressing).

2. The modes switch cyclically: Firefly - Main1 - Main2 -

Main3 - Strobe (if enabled).

Strobe is a hidden mode which you can add or remove from

the additional modes at your choice. To enable (remove)

Strobe :

1. If the head of the flashlight is tightened up (Maximum),

unscrew and tighten up the head of the flashlight quickly 3

times.

2. If the head of the flashlight is unscrewed (Additional),

tighten up and unscrew the head of the flashlight quickly 3

times.

3. Strobe is added as the last mode in a cycle: Firefly -

Main1 - Main2 - Main3 - Strobe.

Tactical:

1. For tactical activation use half-pressing of the button (no

click!).

2. To access the Maximum mode the head of the flashlight

must be tightened, to access Additional modes it must be

unscrewed to 1/8 of a circle.

3. The light remains on while you half press the button.

We recommend to use Maximum mode for short-time

tactical lighting and giving signals. Frequent half-pressings

(<5sec between them) with the head unscrewed to 1/8 can be

used for switching Additional modes.