Armytek Optoelectronics Barracuda PRO Series Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Фонарик Armytek Optoelectronics Barracuda PRO Series. Armytek Optoelectronics Barracuda PRO Series 2 страницы.

Печатать страницу

Set description

6 - Lanyard

7 - 2 spare O-rings

8 - Spare rubber button

9 - User manual

10 - Clip

Your flashlight can inconsiderably differ from the pictures in the manual.

The producer reserves the right to change the package at his own discretion without modifying this manual.

Initial Service

To set/replace batteries:

1. Unscrew the tailcap.

2. Place the batteries with the positive contact (+) facing the head of the flashlight.

3. Adjust the tailcap and tighten it as far as it can go.

We DO NOT RECOMMEND to leave power sources inside the flashlight for a long storage period, as batteries (especially, non-rechargeable)

can leak for various reasons and damage the inner parts of the flashlight. If you want to keep your flashlight in a stand-by state with batteries

in then use new and high-quality batteries and store the flashlight in acceptable for batteries operational temperature and revise the batteries'

state at least once a month. If you have noticed any signs of batteries' defects then withdraw them from the flashlight and utilize. It is also

recommended to replace discharged batteries with new ones before the storage as the chance of leakage is higher with discharged batteries.

Unscrew & Tighten up x10

Constant light

Tighten up

Strobe

Unscrew to 1/8

Half Press & Release (no click)

1/2

Unscrew & Tighten up

Tighten up & Unscrew

Half Press & Release (no click)

1/2

Operation

Momentary on – any mode switched on by half-pressing of the

Change Hunting/Tactical settings

button (no click!) and active till the button is released. It is suitable

for giving signals by short button pressings. Click the button to

switch the light on permanently.

Hunting settings – comfortable modes for hunting. It's set by

default. Turbo mode (when the head is tightened up) and

x10

Additional modes with constant light (changed by click with the

head unscrewed to 1/8). Remote switch can be used in Turbo.

Tactical settings – made for Special forces and Airsoft. Constant

Turbo

light (when the head is tightened up) and Strobe mode (when the

Click x1

head is unscrewed to 1/8). There are 2 Strobe modes and 2

Constant light modes for selection. Remote switch can be used in

ANY mode.

How to change the settings from one to another – unscrew and

tighten up the head of the flashlight at least 10 times (while

rotation you will change the modes). The pause must be <1 sec.

Hunting settings:

Additional modes

Turbo. Tighten the head of the flashlight if it is unscrewed. First full

Click x1

click of the button turns the light on. Second full click turns it off.

Additional modes (2 Firefly + 3 Main). If the head of the flashlight is

tightened up, unscrew it for 1/8 of a circle. Full click of the button

turns the light on at the last used Additional mode.

Cycling through Additional modes. To switch the mode turn the

flashlight off and on (by full click or half-pressing). The modes

Cycling through Additional modes

switch cyclically: Firefly1 – Firefly2 – Main1 – Main2 – Main3.

Firefly1

Tactical settings:

Constant light. Tighten the head of the flashlight if it is unscrewed.

Firefly2

Main3

First full click of the button turns constant light on. Second full

click turns it off. Also you can switch it on by half-pressing of the

Main2

Main1

button (no click).

Strobe. If the head is tightened up, unscrew it for 1/8 of a circle.

Change Constant modes

First full click of the button turns Strobe on. Second full click turns

it off. Also you can switch it on by half-pressing of the button (no

click).

Change Constant modes. The head is tightened up: unscrew it for

Turbo

1/8 and tighten up again – Turbo and Main2 will switch cyclically.

гд

Main2

Change Strobe modes. The head is unscrewed: tighten up and

unscrew it for 1/8 again – Strobe1 and Strobe2 will switch

cyclically.

Change Strobe modes

How to change Turbo1 & Turbo2. There are two Turbo modes. You

will use only one, but can select which one. Turbo2 is boost mode

for maximal brightness and set by default. Turbo1 is constant

brightness mode (more powerful than Main modes).

Strobe2

Half press & release the button (without click) at least 15 times.

гд

The flashlight must be switched on at the end of these actions.

Strobe1

light will flash 1 or 2 times to show the number of Turbo chosen.

Automemorizing. After switching off the last used Mode is

How to change Turbo1 & Turbo2

memorized for quick 1-click access at next switching on.

Lock-out function. Unscrew the tailcap to 1/4 for the protection

from accidental switching on.

Low Battery Indication.

x15

value, the LED flashes 2 times ONCE (after 30sec from switching

on). If you are not sure if it flashed or not switch the flashlight off

and on: in case the battery is low flashes will repeat. Light output

decreases to Firefly mode at critical level.

The

If the brightness is <25% from the nominal