ABBAKA Range Hood & Hy-Ex Ventilation System Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Вентиляционная вытяжка ABBAKA Range Hood & Hy-Ex Ventilation System. ABBAKA Range Hood & Hy-Ex Ventilation System 11 страниц. Range hood & hy-ex ventilation system

Печатать страницу

WARNING: HOOD SURFACE SENSITIVE TO SCRATCHING

ABBAKA range hoods consist of the hood shell and a liner, which fits into the base of the hood shell and

1. After the hood has been uncrated, set it on

a flat, padded surface, such as a blanket to

protect the hood's finish. Remove the wrap

from the base of the hood and lay the hood

down on a long side of the base.

Note: If hood is fitted with utensil rail,

cushion rail before laying on side.

Remove Light Panel screws (A). Pop out

Light Panel (B) to access screws that attach

Light Panel & Liner Removal

liner to interior of hood shell. Remove

screws (C) and set the liner aside.

In order for the ABBAKA luxury range hood or any hood to operate properly, it must be sized cor-

rectly, have adequate blower capacity, be hung properly (centered over cook top and close enough to

burners), and be vented correctly.

NOTE : The hood should be centered over the cooking surface.

NOTE : The recommended mounted height of the hood bottom above the cooking surface is 30-34".

For the Cylindra hood, maximum mounted height is 27" above cooking surface.

NOTE : Round stack island hoods will be supplied with a mount bracket. A bracket may be supplied for

support of tall hoods.

NOTE : When Mounting Island Hoods - Do Not Close Ceiling Before Installation Is Complete.

DO NOT LIFT HOOD BY RAILS

houses the lighting, filters and controls.

Light Only Panel

PLANNING CONSIDERATIONS

Unpacking and Preparation

Hood Components

Duct

Hood Stack

Hood Shell

Liner

Light/Switch

Control Panel

Typical Island

Hood Ceiling

Joist Framing

Electrical

Knock-Out

Ventilator

Switch Leg

Knock-Out