Discount Car Stereo A2D-GM3 Краткое руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство по установке для Адаптер Discount Car Stereo A2D-GM3. Discount Car Stereo A2D-GM3 6 страниц. For gm class iivehicles with xm module and/or remote cd changer

Печатать страницу

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

•

This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.

•

We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage

•

Requirements:

XM module or remote cd changer or RSE

Introduction

Many GM owners will be pleased to know they are now able to connect our

Bluetooth music streaming kit without changing the original radio. The A2D-GM3

Bluetooth add-on works on select 2003-09 GM Class-II audio systems that

includes an External 6/10 or 12-disc CD changer** and/or an XM module

(with or without subscription) or RSE (Rear Seat Entertainment)- vehicle

must have at least one of the aforementioned factory options which

remains connected and functional.

Note:

Required external/remote CD changer is not the 6-CD changer built-

into some AM/FM radios.

A Bluetooth wireless connection means no wires, clutter or complicated setup.

All user has to do is connect adapter (to radio), pair Smartphone or Tablet and

enjoy GPS, Music, and other important applications on the car system.

See Frequently Asked question at the end of this guide for details.

Installation –

to radio

Remove radio from dashboard to gain access to connectors. (Vehicle

specific radio removal instructions are not part of this guide, but

available upon request)

2. Locate 12-pin plug on the back of the AM/FM radio

3. Press 12-pin plug release tabs and pull away to disconnect from radio

(See Fig. 1)

Fig. 1

4. Connect factory 12-pin plug (removed in step 3), to 12-pin gray

connector on harness (See Fig. 2)

Fig.2