Discount Car Stereo BLU-C5 Руководство по установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке для Приемник Discount Car Stereo BLU-C5. Discount Car Stereo BLU-C5 10 страниц. Music streaming module for seelect 1997-04 corvette
Также для Discount Car Stereo BLU-C5: Руководство по установке (9 страниц), Руководство по установке (12 страниц), Инструкции по установке (12 страниц), Руководство по установке (8 страниц), Руководство по установке (12 страниц)

Discount Car Stereo BLU-C5 Руководство по установке
Where to get 12 Acc. supply
1997-03: Many have a 3-pin plug under passenger toe board near BCM (may be
covered in black duct tape) -- See Fig.8 Yellow wire is ACC.
have 3-pin plug; go to Alternate 12V Acc. supply below.
Note: 3-pin plug may not be present in all vehicles.
Alternate 12V Acc. supply
Fuse #22 or #11 of interior fuse box
passenger toe board (See Fig. 9).
The add-a-fuse
mini-tap
circuit seen in Fig. 9a is included for this purpose.
:
If vehicle does not
Fig. 8
:
which is located under
Fig. 9
How to use Add-a-fuse circuit
a. Strip 1/4- 3/8" insolation from end of accessory wire.
b. Look inside blue connector where metal ends. (useful in step d)
c. Insert stripped wire to blue connector
d. Hold wire in place and crimp down (crimping tool or plyers). After
crimp, pull wire to verify crimp integrity.
e. Remove fuse #22 or #11 (if present) from vehicle fuse box otherwise
skip to step g.
f.
Insert factory fuse to empty slot on add-a fuse circuit (See Fig. 9a)
g. Insert add-a-fuse circuit to fuse box slot #22 or# 11
Noteworthy: If there is no fuse in slots #22 or #11, the fuse slot on add-a-fuse
tap remains empty. (See Fig. 9a) Turn ignition "ON" to verify module LED is
flashing, otherwise test fuse slot for power and/or check crimp integrity,
Add a circuit
Fig. 9a