Discount Car Stereo iP2D-BKR Краткое руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство по установке для Блок управления Discount Car Stereo iP2D-BKR. Discount Car Stereo iP2D-BKR 9 страниц. Music streaming module for becker radios with aux menu option
Также для Discount Car Stereo iP2D-BKR: Краткое руководство по установке (10 страниц)

Печатать страницу

Introduction:

The iP2D-BKR module provides the best of both worlds with a dock connector to

charge and play Apple 30-pin iPods, iPhones and iPads plus music streaming via

Bluetooth from any A2DP capable smartphone, tablet, kindle etc. This module is

compatible with all Becker AUX READY radios and replaces optional CD Changer

(if present), but with the storage capacity of these devices, sacrificing the CD

changer should be an easy decision.

An optional remote control is available to operate iOS device while keeping eyes

on the road.

See Frequent ask questions at the end of this guide for details.

Installation:

We recommend disconnecting car battery. But before

anything locate and record radio safe code. Don't

disconnect battery if radio code is not available, otherwise

radio will cease to operate.

Remove radio from dash to gain access to connectors. A set of radio

removal tools (See Fig. 1) is required.

removal tools

Fig. 1

Fig. 2

2. Slide tools into radio slots (51). (Straight edge facing away). Withdraw

radio by pulling outwards. To release keys simply press retaining

springs. See Fig. 2. For detailed radio removal click here.

3. With radio removed press BLUE plug release tab (See Fig. 4) and

disconnect from chamber (C-3) (See Fig. 3)

Fig. 3

Radio connectors

Note!

BLUE and GREEN plugs are for optional CD changer and if present, both

must be disconnected. YELLOW plug is reserved for amplifier and if present

must remain connected.

4. Connect blue plug from installation harness (See Fig. 4) to chamber C-

3 vacated in step 3