Blagdon Minipond 9000 Руководство - Страница 7
Просмотреть онлайн или скачать pdf Руководство для Системы фильтрации воды Blagdon Minipond 9000. Blagdon Minipond 9000 16 страниц. Uv pond filter system
Печатать страницу
Important
The outlet hose should be smooth bore (not corrugated) pipe installed over as short a distance
as possible with no kinks or bends.
We recommend that heavy duty smooth bore black hose is used.
The water level in the filter outlet chamber after the carbon wool cartridge should not be higher
than the outlet fitting when in use.
See Flow detail diagram maximum outlet chamber level. (page 9)
WARNING: If there is insufficient drop in height from the outlet pipe or excessive bends or kinks
this will cause the filter to drain poorly allowing the outlet chamber to fill above the maximum
recommended level. This will increase filter maintenance and may cause the filter to overflow.
Connecting Inlet Hoses
The recommended hose size for
your Minipond filter is stated in the filter
performance and specification chart.
Always secure hose with a jubilee clip.
Warming the hose in a bucket of
boiling water can aid fitting.
Always ensure that the smaller diameter
hosetail is cut off and removed to
prevent reduced filter performance.
Use the shortest possible hose lengths to
minimise flow restrictions.
Avoid folds and kinks in the hose, which will reduce flow and filter performance.
17.562 Blagdon_Minipond filter instructions_9000/12000 AW3.indd 8
INSTALLATION
FILTER
CUT
INLET TO UVC
LOCKING NUT
CUT & REMOVE
CUT
CUT
UNWANTED
HOSETAILS
25mm/1"
HOSE
RECOMMENDED
JUBILEE CLIP
5
14/07/2017 17:00