Blagdon AMPHIBIOUS A3000 Листовка - Страница 14

Просмотреть онлайн или скачать pdf Листовка для Насосы для пруда Blagdon AMPHIBIOUS A3000. Blagdon AMPHIBIOUS A3000 16 страниц.

Amphibious Pump Leaflet 2.qxd

Problem

Low flow from pump

1. Follow routine cleaning procedure.

2. Follow monthly cleaning procedure.

3. Ensure pipe work is not blocked, leaking or is laid so that it gets crushed

or kinked.

4. Keep the height that water is to be pumped from the water surface (called

Head) to a minimum. The higher the head the lower the flow rate and the

more wear on the pump.

5. Use the largest diameter, smoothest bore pond hose over the shortest

distance and keep hose fittings to a minimum. This removes frictional loss.

6. The larger 1" hose fitting will give maximum pump flow performance.

If you do not require a fountain a significant increase in performance will

be gained by connecting the hose fitting directly to the pump outlet flange.

Poor fountain performance

1. Reduced height.

2. Jets blocked.

Clean flow adjuster and fountain

head. Wash under a tap or hose.

Blagdon Pond Pump Cleaner

should be used to remove lime

scale build-up/waste (see diagram)

for improved results.

No flow from pump

1. Check power supply is on.

2. Check fuse and wiring (SEE ELECTRICAL INSTALLATION).

3. Follow low flow procedure as above.

If none of the above works contact Interpet (Blagdon) Consumer Advice

Department (See Faults problem procedure Page 13).

TROUBLESHOOTING

30/3/06

13:33

DAISY/TRIPLE

To clean, remove

head and rinse.

Or in hard water

areas, use Blagdon

Pond Pump Cleaner.

Page 14