Blagdon AMPHIBIOUS Series Листовка - Страница 11

Просмотреть онлайн или скачать pdf Листовка для Насосы для пруда Blagdon AMPHIBIOUS Series. Blagdon AMPHIBIOUS Series 16 страниц.

Amphibious Pump Leaflet 2.qxd

MAINTENANCE & CLEANING

Carry out routine maintenance when pump flow is visibly reduced.

1. Switch off electricity to the pump, and all other electrical pond equipment.

2. Remove pump from pond (do not use the cable to lift the pump).

3. Open pre-filter by unscrewing the pump flange from the outlet of the pump

and opening the pre-filter lock with a coin.

4. Remove pump (see getting to know your Amphibious Pre-Filter). Wash the

pre-filter and impeller inlet thoroughly in fresh water.

A blocked pre-filter and impeller inlet will reduce the pump flow rate.

Follow steps 1 to 4 as per Routine Maintenance.

The impeller and impeller inlet can become blocked by pond waste.

Clean the impeller according to the following instructions.

Follow steps 1 to 4 as per Routine Maintenance.

MONTHLY MAINTENANCE

Remove the pump motor from the impeller/rotor housing by holding the housing

while turning the motor clockwise (see arrows provided on the pump).

Dismantle the Impeller/Rotor assembly by undoing the centre bolt ensuring the

washer is kept in a safe place. NB: THIS IS A LEFT-HAND THREADED BOLT SO

MUST BE UNSCREWED IN A CLOCKWISE DIRECTION (THE OPPOSITE TO A

NORMAL THREAD DIRECTION). Remove the ceramic thrust washer, the ceramic

shaft and the impeller rotor assembly from the impeller/rotor housing.

Clean all parts of the impeller in fresh water ensuring that the impeller vanes and

impeller inlet are clean.

30/3/06

Impeller

Vanes

13:33

Page 11

Impeller

Inlet