ARNOLD MCU 400 D Руководство - Страница 16

Просмотреть онлайн или скачать pdf Руководство для Контроллер ARNOLD MCU 400 D. ARNOLD MCU 400 D 20 страниц. Mirrorball motorcontroller

Mirrorball Motorcontroller

Maintenance

The operator has to make sure that safety-related and machine-technical installations are to be

inspected by an expert after every year in the course of an acceptance test.

The operator has to make sure that safety-related and machine-technical installations are to be

inspected by a skilled person once a year.

The following points have to be considered during the inspection:

01) All screws used for installing the device or parts of the device have to be tightly connected and

must not be corroded.

02) There may not be any deformations on housings, fixations and installation spots.

03) Mechanically moving parts like axles, eyes and others may not show any traces of wearing.

04) The electric power supply cables must not show any damages or material fatigue.

The Mirrorball Motorcontroller requires almost no maintenance. However, you should keep the device

clean.

Please clean internal components once a year with a light brush and vacuum cleaner.

Keep connections clean. Disconnect electric power, and then wipe the connections with a damp cloth.

Make sure connections are thoroughly dry before linking equipment or supplying electric power.

This troubleshooting guide is meant to help solve simple problems.

If a problem occurs, carry out the steps below in sequence until a solution is found. Once the device

operates properly, do not carry out following steps.

If the mirror ball control system does not operate properly, refer servicing to a technician.

Suspect two potential problem areas as: the power supply and the motor.

01) Power supply. Check if the device is plugged into an appropriate power supply.

02) The motor. Return the device to your Arnold Lichttechnik dealer.

03) If all appears to be O.K., plug the device in again.

04) If you are unable to determine the cause of the problem, do not open the Mirrorball Motorcontroller,

as this may damage the device and the warranty will become void.

05) Return the device to your Arnold Lichttechnik dealer.

Ordercode: 60455