Blake UK PROCEPTION PROAPW300L Расширенные инструкции - Страница 12
Просмотреть онлайн или скачать pdf Расширенные инструкции для Беспроводная точка доступа Blake UK PROCEPTION PROAPW300L. Blake UK PROCEPTION PROAPW300L 15 страниц. In-wall and ceiling high speed access points
Также для Blake UK PROCEPTION PROAPW300L: Руководство (2 страниц), Руководство пользователя (20 страниц)
Печатать страницу
PROAPW300L- 300Mbps 2.4GHz In Wall Access Point
with RJ45 Port
PROAPW750L- 750Mbps 2.4 & 5GHz In Wall Access Point
with RJ45 Port
PROAPCEILING- 1200Mbps 2.4 & 5GHz Ceiling Access Point
Advanced Instructions
Due to the Browser Cache process on a PC please be aware that we advise to refresh (shift F5) any screen before
working on settings.
Usually a "force refresh" is enough.
Chrome: Press the following key combination: Shift + Ctrl + F5
IE: Press the following key combination: Ctrl + F5
Safari On PC: Ctrl + F5 or on Apple MAC: CMD + R
Alternatively, use the Chrome browser in Incognito mode can also reduce browser Cache issues.
Please see
https://www.refreshyourcache.com
The Access point can take up to 2 minutes to reinitialize after reboot.
Using the In-Wall AP in "AP Mode" will require you to set your devices IP to static. Set 192.168.188.250 as the
device IP and 192.168.188.253 as the gateway IP address.
For easiest install use the default Gateway mode for initial installation.
App for finding spare Wi-Fi channels (Android only) WiFi Analyser by farpr
App for searching on the networks for IP address of the Access Point (Apple or Android)
Network Analyzer here
https://techet.net
Using a Wi-Fi analyzer on PC we suggest Winfi
Reset back to default by holding front button for 15 seconds.
Check out the Firefox Browser and its Cache add-ons.
FAQ
•
Light is not illuminated on the Access Point.
1. Check the Power supply is connected and the cable/RJ45 is correctly fitted.
2. Check the LED timer setting.
•
Speed is lower on the access point than expected.
1. Check the Channel number that the AP is using, is not currency in use buy another device.
Use a WIFI Analyser (as suggested above)
2. Check the network cable is in good condition and there are not tight clips or kinks on the cable.
3. Bear in mind that 2.4GHz connection is slower than 5GHZ
•
I cannot find the IP number of the Access Point.
1. Use a network scanner on your PC or mobile device. (As suggested above)
2. If the AP is still not visible then reset the device.
•
I cannot connect to the Wi-Fi.
1. Always use SSID and password that do not have spaces or strange none alphanumerical
characters.
2. Your Wi-Fi password can be reset within the setting screen of the AP.
•
Wi-Fi keeps disconnecting.
1. Check Wi-Fi timer is not set to reboot, in settings
2. Turn off DFS mode.
www.blake-uk.com
0114 223 5000
PD2011-8246-04
TIPS
for further details on the Cache process.
https://www.helge-keck.com/
HERE