Blake UK PROCEPTION PROAPW300L Расширенные инструкции - Страница 2
Просмотреть онлайн или скачать pdf Расширенные инструкции для Беспроводная точка доступа Blake UK PROCEPTION PROAPW300L. Blake UK PROCEPTION PROAPW300L 15 страниц. In-wall and ceiling high speed access points
Также для Blake UK PROCEPTION PROAPW300L: Руководство (2 страниц), Руководство пользователя (20 страниц)
Печатать страницу
PROAPW300L- 300Mbps 2.4GHz In Wall Access Point
with RJ45 Port
PROAPW750L- 750Mbps 2.4 & 5GHz In Wall Access Point
with RJ45 Port
PROAPCEILING- 1200Mbps 2.4 & 5GHz Ceiling Access Point
Advanced Instructions
SIX STEP EASY AND QUICK SETUP.
If the access point is still in its default
If you are using Apple products simply scan the QR codes below with your Tablet.
st
The 1
QR code connects to the Wi-Fi and the 2
This can sometimes work with Android depending on the QR code app and the Tablet.
1. On an Apple phone, using your camera, scan QR code 1
On android download the free QR Code Reader
by Duy Pham (MMLab) from Playstore and scan QR Code 1
Wait 10 seconds for the phone to connect to the AP
2. Now Scan QR code 2
If after several seconds you get "webpage not available, simply switch off mobile
data on your device and scan again
3. Log in with the word admin (lowercase)
4. Select Get IP from Gateway (Customers router)
If your connecting to a business network you may need to select static IP and set
up with setting from the company network Admin.
5. Set-up Wi-Fi name (SSID) and required password
It is recommended that you leave all other setting to default unless you are
familiar with these settings.
6. Click Apply...
You have now successfully setup the Access point with your Wi-fi name and
password. The Ap will now reboot, get a new IP from the customers router and
start broadcasting Wi-Fi. This can take 2-3 mins for this to complete. You may
see 2.4 GHz Wi-Fi start first and 5GHz Wi-Fi start a little later.
You will now need to reconnect to the Wi-Fi with your new SSID and password.
NOTE:- You can also connect to the Wi-Fi name Prowifi_2.4G with password
4wG7cZXd and browse to 192.168.188.253 if the QR code cannot be scanned.
www.blake-uk.com
0114 223 5000
PD2011-8246-04
Gateway
Apple Quick Connect
1st Scan here to connect
mode, then connection is easier via Wi-Fi.
nd
QR code connects to the Login screen.
2nd Scan here to setup