ARO PP10A-XXX-XXX-A Series Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Водяной насос ARO PP10A-XXX-XXX-A Series. ARO PP10A-XXX-XXX-A Series 12 страниц. 1" dry powder diaphragm pump
Печатать страницу3
5
9
7
2
Torque Sequence
PP10A-XXX-XXX-A (en)
RELEASED 20/Feb/2019 12:56:22 GMT
PARTS LIST / PP10A-XXX-XXX-A FLUID SECTION
1
8
FOR THE AIR MOTOR SECTION,
10
SEE PAGES 8 AND 9.
6
4
Figure 4
TORQUE REQUIREMENTS
NOTE: DO NOT OVERTIGHTEN FASTENERS.
(14) diaphragm bolt, 25 - 30 ft lbs (33.8 - 40.6 Nm).
(26) screws, 20 - 25 ft lbs (27.1 - 33.8 Nm).
(29) Nut, 15 - 20 ft lbs (20.3 - 27.1 Nm).
(131) screws, 12 - 17 ft lbs (16.2 - 23.04 Nm).
LUBRICATION / SEALANTS
Apply PTFE tape to threads.
Apply Loctite® 242® to threads at assembly.
Apply Loctite 271™ to threads at assembly.
Apply Lubriplate FML-2 grease (94276) to all "O" rings, "U" cups
and mating parts.
Apply anti-seize compound to threads and bolt and nut flange
heads which contact pump case when using stainless steel fasteners.
Page 7 of 12