BLAM Live LA 1000 Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель BLAM Live LA 1000. BLAM Live LA 1000 17 страниц.

POWER CONNECTIONS

Connect an empty fuse holder within 18'' (45 cm) of the car battery

and run 8 mm² (8 gauges) cable from this fuse to the amplifier

location. Then connect the fuse holder to the battery +12 Volts.

Connect the ground terminal to the closest point on the chassis of

the vehicle. Keep this ground wire to less than 39'' (1 m) in length.

Ensure that the contact surface is free of paint or rust so that the

connection between the terminal and the chassis is effective.

The +12 V remote turn-on wire is typically controlled by the source

unit's remote turn-on output.

The amplifier will turn on when +12 V is present at its remote (REM)

input and turn off when +12 V is switched off. Connect the remote

wire using 1 to 3 mm² (12 to 16 gauge) wire to the REM connection

of the amplifier with Allen screw driver than connect the other end

of the remote wire to either the source unit's turn on output or

ignition switch circuit.