Discovery Channel STX7500 Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Погодная станция Discovery Channel STX7500. Discovery Channel STX7500 10 страниц. Weathertech storm tracker

Печатать страницу

Setting Your Location and Setting Clock Manually

If your main station did not pick up the correct time from the WWVB transmission, you can set the time manually.

1. Hold the "MODE/SET" button for 3 seconds to enter Clock/Calendar Mode.

2. Press "+" or "-" button located on the back of the unit to adjust the setting, and press "MODE/SET" button to conﬁrm and continue.

3. Every time you press the "MODE/SET" button you will step to the next setting in the sequence, following this order: Hour, Minute, Second, Year, Month-Day format, Month, Day,

Country, City.

4. You will exit out of the time setting mode automatically after 15 seconds.

Setting Sunrise/Sunset & Moonrise/Moonset

Your STX7500 main station will automatically calculate the sunrise and sunset once it knows the time and day and the "Country" and "City".

1. Press "SUN/MOON" button to display hours the sun will be above the horizon.

2. If moonrise or moonset occur next day, then readout will display "MOONRISE +1" or "MOONSET +1".

Sunrise/Sunset & Moonrise/Moonset Quick Check Mode

You can view Sunrise/Sunset and Moonrise/Moonset in any location you want – not only your home location.

1. Hold "SUN/MOON" button for 3 seconds to enter Quick Check Mode.

2. The location will begin to blink.

3. Press "+" or "-", located on back of unit, to enter the "Country", "City", "Month" and "Day" which you would like to check.

4. Press "SUN/MOON" button to conﬁrm.

5. The Sunrise/Sunset and Moonrise/Moonset time blinks while main station computes.

6. When blinking stops, the main station has computed the times for the location and calendar you requested.

7. The middle letter of the location will continue to blink, telling you that station is still showing Quick Check Mode.

DiscAdult_Weather 4_STX7500_inst6-7 6-7

8. Press "SUN/MOON" or wait 15 seconds to exit Quick Check Mode.

12/24 Hour Display Mode

Press "+(12/24)" button located on back of unit to select 12 or 24 hour mode.

Using the Alarm Clock

1. Press "ALARM" button to view ﬁrst the Alarm Time, then press again to turn alarm on (

2. After you have turned alarm on or off, press "ALARM" again or wait ten seconds to conﬁrm setting.

3. To set the alarm time, hold "ALARM" button for 3 seconds.

4. Press "+" or "-", located on the back of the unit, to adjust alarm time.

5. Press "ALARM" button to conﬁrm time.

6. When alarm sounds, press the "SNOOZE/LIGHT" button to put alarm to sleep for 5 minutes. This can be repeated seven times before the alarm turns off permanently.

7. Press and hold the "SNOOZE/LIGHT" button for 3 seconds to turn alarm off permanently.

icon will show on your main display), or alarm off (icon will not show).

2/2/07 2:49:24 PM