Cube Array C4 Руководство пользователя

Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары Cube Array C4. Cube Array C4 2 страницы.

Powerbank

User Manual

cubearray.com

Instructions

Thank you for using our products.

Please read the instructions carefully

before using the product. Follow the

instructions and use it properly.

Charging C4 (Figure 1/ Figure 2)

1. Use original USB data cable and connect micro USB to

micro USB port on C4.

2. Connect USB cable to USB port on DC5V USB charger or

computer. If LED signal flickers, it means C4 is being

charged.

3. Four LED power indicators lights on, indicates that C4 is

fully charged.

Please pull out power supply after

recharging fully.

Charging digital product with C4 (Figure 3)

1. Check if the charging voltage of the digital product is

compatible with the DC5V output voltage of C4.

2. Use the digital product's original cable, and connect one

end to the digital product, the other end to C4. Press the

button, LED power indicators lights on for 5 seconds then

light off, the digital product will be charged automatically.

Check residual capacity

Press the button, LED power indicators lights on for 5

seconds then light off.

Instructions figures

Residual capacity indicator

LED Signal

Percentage

1st signal lights up

1st, 2nd signals light up

25~50%

1st, 2nd, 3rd signals light up

50~75%

1st, 2nd, 3rd and 4th signals light

75~100%

Battery

0~25%