CUBETAPE C200 Series Краткое руководство по эксплуатации

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Измерительные приборы CUBETAPE C200 Series. CUBETAPE C200 Series 2 страницы.

Печатать страницу
CUBETAPE C200 Series Краткое руководство по эксплуатации
C200 Series
Quickstart Guide April 2023
Scan Registration QR code or visit www.cubetape.com/register to register your device
IN THE BOX
USB Cable
RF Dongle
Bigfoot
Charge Cradle
Silicone Tip
(if selected)
C200 Series
Quickstart Guide April 2023
Scan Registration QR code or visit www.cubetape.com/register to register your device
IN THE BOX
C200
Registration
Pair
BT Direct (HID)
BT App (SPP)
CHARGE BATTERY:
Insert USB cable by the Scan button and connect to adaptor or if
using charge cradle, connect USB cable and insert C200.
Red
LED is ON when charging.
POWER ON C200:
Press the Scan button to power on.
OPTION 1:
Connect to Windows using RF dongle.
USB Cable
RF Dongle
• Scan Pair, LED will flash green.
• Insert dongle in spare Windows USB port, LED will turn
blue
when connected.
• Dimensions and barcodes will now be sent to the active Windows app.
OPTION 2:
Connect to Android or Windows using Bluetooth Direct Mode (HID).
Bigfoot
Charge Cradle
• Scan BT Direct (HID).
Silicone Tip
(if selected)
• Scan Pair or hold Scan button for 6 seconds to enter pairing mode.
LED will flash alternately
blue
and green. (To cancel pairing mode press Scan twice).
Quickstart Guide
C200 Series
IN THE BOX
Scan Registration QR code or visit www.cubetape.com/register to register your device
• Connect Cubetape from Android or Windows connection menu.
C200
Registration
Pair
BT Direct (HID)
BT App (SPP)
using charge cradle, connect USB cable and insert C200.
CHARGE BATTERY:
POWER ON C200:
Insert USB cable by the Scan button and connect to adaptor or if
Press the Scan button to power on.
LED is ON when charging.
Red
USB Cable
RF Dongle
OPTION 1:
• Insert dongle in spare Windows USB port, LED will turn
• Scan Pair, LED will flash green.
• Dimensions and barcodes will now be sent to the active Windows app.
Connect to Windows using RF dongle.
blue
when connected.
LED will turn
blue
when connected.
• Scan BT Direct (HID).
• Scan Pair or hold Scan button for 6 seconds to enter pairing mode.
LED will flash alternately
OPTION 2:
Connect to Android or Windows using Bluetooth Direct Mode (HID).
blue
and green. (To cancel pairing mode press Scan twice).
Silicone Tip
Bigfoot
Charge Cradle
(if selected)
LED will turn
• Connect Cubetape from Android or Windows connection menu.
OPTION 3:
• Dimensions and barcodes will now be sent to the active app.
blue
Connect to 3rd Party Android or Windows app using
when connected.
• Dimensions and barcodes will now be sent to the active app.
Quickstart Guide
ScanStik
zero
ScanStik
User Guide
• Scan BT App (SPP).
• Refer to 3rd Party Application Guide.
DEFAULTS AND FACTORY RESET
Bluetooth Application Mode (SPP).
Charge Cradle
also contains the
Shortcuts Code
on base.
For Scan to Pair and NFC pairing
options go to Configuration Guide.
For full manual go to
www.cubetape.com/downloads
Connect to Windows host using dongle
Factory default settings are:
Units = inches
Output = nearest inch
Suffix DIM = TAB
Suffix GEN = TAB
Shortcuts
zero
For support email
Return to factory settings anytime by scanning
Scanner Defaults and Wireless Defaults.
Scanner Defaults
Wireless Defaults
OPTION 3:
Connect to 3rd Party Android or Windows app
Quickstart Guide
ScanStik
using Bluetooth Application Mode (SPP).
Charge Cradle
Wireless Defaults
• Scan BT App (SPP).
Wireless Defaults
also contains
the Shortcuts
• Refer to 3rd Party Application Guide.
Code on base.
ScanStik
Shortcuts
DEFAULTS AND FACTORY RESET
User Guide
Factory default settings are:
For Scan to Pair and NFC pairing
Connect to Windows host using dongle
options go to Configuration Guide.
Units = inches
Suffix DIM
= TAB
zero
For full manual go to
Output = nearest inch
Suffix GEN = TAB
www.cubetape.com/support
For support email
Return to factory settings anytime by scanning
Scanner Defaults and Wireless Defaults.
Scanner Defaults
Scanner Defaults
Quickstart Guide
ScanStik
Charge Cradle
also contains
the Shortcuts
Code on base.
ScanStik
Shortcuts
User Guide
For Scan to Pair and NFC pairing
options go to Configuration Guide.
For full manual go to
www.cubetape.com/support
For support email
support @ cubetape.com
C200
Registration
CHARGE BATTERY:
using charge cradle, connect USB cable and insert C200.
POWER ON C200:
OPTION 1:
• Scan Pair, LED will flash green.
• Insert dongle in spare Windows USB port, LED will turn
• Dimensions and barcodes will now be sent to the active Windows app.
OPTION 2:
• Scan BT Direct (HID).
• Scan Pair or hold Scan button for 6 seconds to enter pairing mode.
LED will flash alternately
• Connect Cubetape from Android or Windows connection menu.
LED will turn
• Dimensions and barcodes will now be sent to the active app.
OPTION 3:
• Scan BT App (SPP).
• Refer to 3rd Party Application Guide.
DEFAULTS AND FACTORY RESET
Factory default settings are:
Connect to Windows host using dongle
Units = inches
Output = nearest inch
Return to factory settings anytime by scanning
Scanner Defaults and Wireless Defaults.
Pair
Insert USB cable by the Scan button and connect to adaptor or if
Press the Scan button to power on.
Connect to Windows using RF dongle.
Connect to Android or Windows using Bluetooth Direct Mode (HID).
blue
and green. (To cancel pairing mode press Scan twice).
blue
when connected.
Connect to 3rd Party Android or Windows app
using Bluetooth Application Mode (SPP).
Suffix DIM
= TAB
Suffix GEN = TAB
BT Direct (HID)
BT App (SPP)
LED is ON when charging.
Red
when connected.
blue
Wireless Defaults
Scanner Defaults
Scanner Defaults
Wireless Defaults