3D Hobby Shop Extra SHP 47" Руководство по сборке - Страница 13

Просмотреть онлайн или скачать pdf Руководство по сборке для Самолеты 3D Hobby Shop Extra SHP 47". 3D Hobby Shop Extra SHP 47" 20 страниц. Arf rc

Pushrod connectors – The pushrod connectors attach to the servo arm with a nut, as shown. When you

install these pushrod connectors, do not tighten the nut all the way, the connector must be free to rotate.

Place a drop of medium CA on the end of the nut and apply CA accelerator to lock it to the threads. You

must lock the nuts on your servo connectors, otherwise the nuts will vibrate loose and your plane will

crash.

On the HS-65 servo stock arm, you must open the diameter of the hole in the servo arm for the pushrod

connector, use a drill bit or you can rotate the point of a hobby knife in the hole to open it.

Make sure your connectors rotate freely after installation.

Attach servo extension onto rudder servo, use tape or a commercial servo plug lock to be sure that the

extensions does not become unplugged in flight. Using servo mounting screws which come in the servo

package, install the rudder servo as shown.

Use the longest pushrod in your kit for the rudder. Install as shown