Dish TV S9020DVD Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Приемник Dish TV S9020DVD. Dish TV S9020DVD 12 страниц. Dvd+dvb-s combo receiver
Печатать страницуUser Interface
2.Menu Operations
Once the channel scan is finished and all the channels are stored into the database,
you can start to watch the digital TV channel or listen to the radio broadcast, some
typical operations are given in this chapter.
2.1 Main Menu
Main Menu for operating a lot of functions.
(1) Press <Menu> button to enter Main Menu.
(2) Press <Info> button to display the version information of STB.
2.2 SETUP
Set the system settings of STB.
2.2.1 Installation
Installation menu include General Setting,
MY DISH and TP MANAGER.
2.2.1.1 General Setting
Set the receiving and playing program
settings of STB, as Figure 7.
2.2.1.2 OSD Language
Set the On Screen Display Language.
2.2.1.3 Audio Language
Set the audio language for watching program.
2.2.1.4 Subtitle Language
Set the language for displaying subtitle.
2.2.1.5 Auto Time Zone / Time Zone
Allow you to enable or disable auto time zone
offset update.
If you know the GMT(Greenwich Mean Time)
time zone offset of your location, set the Auto
Time Zone to OFF and select an appropriate
Time Zone, otherwise set it to ON and let the
system update the time zone automatically
according to the transport stream.
2.2.2 TV Setup
Setup the display mode for TV. See Figure 8.
2.2.2.1 TV Format
Set display format for watching program, such as 4:3LB, 4:3PS, 16:9PB,16:9AUTO.
4:3LB(LetterBox): Typically for wide screen content displays on conventional 4:3 TV
with black bars above and below the picture.
SETUP- Installation (General Setting)
01/01/08 00:19
English
OSD Language
English
Audio Language
Subtitle Language
OFF
GMT usage
OFF
Time Zone
+ 08:00
Set Date
2008/01/01
Set Time
00:02
Switch
Move
Exit
Figure 7. General Setting
SETUP- TV Setup
01/01/08 00:19
16:9 PB
TV Format
TV Mode
AUTO
OSD Transparency
6
Banner Display Time
3 S
Video Output
CVBS
Switch
Move
Exit
Figure 8. TV Setup
4
User Interface
4:3PS(PanScan): Typically for wide screen content displays on conventional 4:3 TV
with left and right edges cropped.
16:9PB(PillarBox)/16:9 AUTO: Typically for wide screen 16:9 TV.
2.2.2.2 TV Mode
Set PAL, NTSC or AUTO for display. AUTO will switch PAL or NTSC by program content.
This setting should be matched with user's TV.
2.2.2.3 OSD Transparency
Set the On Screen Display transparency. 1 is the most transparent.
2.2.2.4 Banner Display Time
Set Banner displays time. Banner doesn't disappear when set as "Always" and
disappears at timeout when set as other values.
2.2.2.5 Video Output
Set the video output mode to TV.
2.2.3 Password
Set password for menu lock or channel lock or censorship lock. And the user can
change password here, the default PIN Code is 6666.
2.2.3.1 Menu Lock
Lock the menus by password.
2.2.3.2 Channel Lock
Lock the channel which has been set to lock status when turning on the Channel Lock.
Please see section 2.3.1.2 for details.
2.2.3.3 Censorship Lock
Lock the program by password and censorship threshold. The censorship info is in
program content. Under the censorship rating, user has to enter the right password for
watching program.
2.2.3.4 Change Password
To change the PIN code, select this option, press <Left/Right> button to trigger
changing password and <0~9> buttons to enter old password, new password and
confirm new password. If succeed, the PIN Code Changed message will be displayed,
otherwise the PIN Code Error message will be displayed.
2.2.4 Advance Timer
User can set timer for watching the program by date and time manually or from the
TV/Radio Guide(see section 2.3.2). When setting date and start time is arrived,
STB will automatically switch to the wanted program. Press any key except
<Vol-/Vol+/Mute> button, STB asks user to abort it or not when watching booked
program. User can delete the event while it isn't at running.