Dishlex DX103 Руководство пользователя - Страница 10
Просмотреть онлайн или скачать pdf Руководство пользователя для Посудомоечная машина Dishlex DX103. Dishlex DX103 16 страниц. Freestanding dishwasher
Также для Dishlex DX103: Руководство пользователя (16 страниц), Руководство по установке (3 страниц)
Печатать страницу
Fault code and malfunction
• continuous flash of the start/cancel
indicator light
• 1 flash of the 'Finished' indicator
light
The appliance does not fill with water
• continuous flash of the start/cancel
indicator light
• 2 flashes of the 'Finished' indicator
light
The appliance will not drain
The program does not start
After the check, switch on the appliance. The pro-
gram continues from the point of interruption. If the
malfunction shows again, contact your Customer
Care Centre.
For other fault codes, not described in the chart, con-
tact your Customer Care Centre.
These data are necessary to help you quickly and
correctly:
• Model (Mod.)
The dishes are not clean
The dishes are wet and dull
10
• The water tap is blocked or furred with limescale.
Clean the water tap.
• The water tap is closed.
Open the water tap.
• The filter in the water inlet hose is blocked.
Clean the filter.
• The connection of the water inlet hose is not correct. The hose
can be kinked or squashed.
Make sure that the connection is correct.
• There is a blockage in the sink spigot.
Clean the sink spigot.
• The connection of the water drain hose is not correct. The hose
can be kinked or squashed.
Make sure that the connection is correct.
• The appliance door is not closed.
Close the door.
• Mains plug is not connected.
Plug-in appliance to the mains.
• The fuse has blown out in the household fuse box.
Replace the fuse.
The cleaning results are not satisfactory
• The selected washing program is not applicable for the type of load and
soil.
• The baskets are loaded incorrectly so that water cannot reach all surfa-
ces.
• Spray arms do not turn freely because of incorrect arrangement of the
load.
• The filters are dirty or not correctly installed.
• The quantity of detergent is too little or missing.
• No rinse aid has been used.
• The rinse aid dispenser is empty.
Possible cause and solution
• Product number (PNC)
• Serial number (S.N.)
For these data, refer to the rating plate.
Write the necessary data here:
Model description : ..........
Product number : ..........
Serial number : ..........