ARP Fridge Defend Инструкции пользователя - Страница 6
Просмотреть онлайн или скачать pdf Инструкции пользователя для Автомобильные аксессуары ARP Fridge Defend. ARP Fridge Defend 17 страниц. V5 + fan control
Также для ARP Fridge Defend: Руководство пользователя (10 страниц)
Печатать страницуARP Control v5.x
ARP BUTTON
Press & Hold Display Button
until next parameter is
displayed, then release.
Press & Hold Display Button
until next parameter is
displayed, then release.
Press & Hold Display Button
until the display returns to the
flashing dot for ARP mode. We
recommend leaving the display
turned off if not in use.
If controller is in the SP0 mode, proceed to next functions.
Press & Hold Display Button
until next parameter is
displayed, then release.
Press & Hold Display Button
until the display returns to the
flashing dot when in SP0 mode.
ADD USER NOTES HERE:
Graphical User Instructions 04/20/2020 © ARPC L.L.C. All rights reserved.
ARP DISPLAY
The display will toggle between the
MAX (14.5) and MIN (13.7) voltage
recorded while display is in this
function.
OR
FURTHER INFORMATION
If the ARP is a fan control
version, the next value to be
displayed is the fan sensor
temperature. If the sensor is
below 35 F or above 155 F the
display will read
OA
range.
The last value displayed with the
Display button is the fridge
voltage. The reading shown is
13.7 volts. The fridge will not run
if there is less than 10.5 volts.
When in SP0 troubleshooting
mode this value checks the
internal function of the controller.
This is the voltage MIN/MAX.
Use this function to check the
highest and lowest voltages on
the system. The example shows
typical system voltage with a
solar charger cycling on and off.
This is very handy for
determining AC ripple on the
electrical system.
6
for out of