Disney iHome DM-M79 Руководство - Страница 2
Просмотреть онлайн или скачать pdf Руководство для Динамики Disney iHome DM-M79. Disney iHome DM-M79 2 страницы. Portable rechargeable mini speakers
Печатать страницуSetting Up and Using the DMM79
1. Remove stand, speakers and cables from packaging.
2. Locate the USB/mini USB/audio cable.
3. Pry open cable clip on cables to free up/ release cables.
4. Locate the two mini USB cable ends and grip them together in one
hand between thumb and forefinger on the cable about 4 inches
below the plugs. (ref to Figure 1)
5. Turn stand upside down.
6. Place the mini USB cable in the channel (located on the back of the
stand) with the mini USB plugs extending about four inches out of
the stand and wrap the remaining cable loop around the cable
wrapping tree and press the cable into the cable locking notch on
the cable wrapping tree. Leave the standard USB plug cable and
audio cable loose outside. (ref to Figure 2)
7. Locate the audio cable and wrap around the cable tree a few times.
(ref to Figure 3)
a) If headphone jack on your audio device is on the bottom of the
device, insert the audio cable plug through the audio cable slot
towards the front of the stand. (ref to Figure 4)
b) If headphone jack on your audio device is located on its top or
side, insert audio cable plug through hole in center of stand. (ref
to Figure 5)
8. Turn stand over
9. If closed, gently twist speakers slightly to the right to open. Place
speakers in the stand (L speaker on the left, R speaker on the right)
with the mini USB port facing the cable notch on the back of each
speaker platform area.
10. Connect a mini USB plug to the mini USB port on each speaker.
(ref to Figure 6)
11. Connect the standard USB cable to a working USB charging port.
Allow to charge for up to 3 hours for first time use. The light on the
speaker will turn red while charging and turn blue when fully
charged. When the blue power light dims or the sound becomes
distorted, it's time to recharge the batteries. When done charging,
you may wish to store the USB cable back under the DMM79 base.
You may need to disconnect the speakers first to do so, then
re-connect them. (ref to Figure 7)
NOTE: You can listen to the speakers while they are charging.
12. Connect the audio cable to the headphone or line out jack of your
audio device and place audio device in the cradle on the stand.
Press the device lever to hold device firmly in cradle. (ref to Figure
8)
13. Slide power switch on each speaker to ON position. The blue
power light will come on.
14. Turn on your audio device and place in play mode. Adjust volume
on audio device.
Figure 1
Figure 2
Figure 4
Figure 5
Figure 7
Figure 8
To unlock and expand each speaker, grip the top and bottom and give
a small twist counter-clockwise. DO NOT pull hard once open, as the
built in spring will automatically extend the speaker to its proper
position.
To compress and lock speaker, line up lock tab on speaker top with
lock/unlock icon on base. Press speaker down from the top and twist
clockwise to lock in place.
The speakers have magnetic bases. They can be joined together for
storage. To separate the speakers gently pull them apart.
Note: the larger USB plug is used for charging only, not for audio.
NOTE: This product has magnets in the base of each
speaker. To avoid interference or possible damage,
do not place speakers directly on electronic devices
such as computers or monitors.
Left speaker
Figure 3
Power
Switch
LED
Figure 6
To computer or USB charger
To Right speaker
To audio device
USB Connection
Right speaker
Power
Switch
To Left speaker