Acoustic LS6 Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Переключатель Acoustic LS6. Acoustic LS6 8 страниц. Loop switch

acousticamplification.com

8. Buffer Rear and Buffer Front buttons engage a buffer at the input (Buffer

Front) or at the output (Buffer Rear) of the LS6 lowering the impedance and

optimizing the signal for longer cable runs

9. Edit/Save footswitch allows you to create, edit and save your loop

combination programs in the LS6

10. Mute footswitch fully silences the output of the LS6

11. Footswitches numbered 1 through 6 activate/deactivate individual loops

(Live mode) or custom combinations of loops (Program mode). Pressing

select footswitches at the same time will activate Bank Up, Bank Down

and Tuner functions.

• In Program mode, pressing footswitches 1 + 2 together will navigate down

one bank from the current bank, while pressing 2 + 3 together will navigate

up one bank.

• In any mode, pressing footswitches 5 + 6 together will activate the LS6

internal tuner. This will mute the output of the LS6 and bring up a tuner on

the LED Display.

Navigating and Programming the LS6

There are two modes for the LS6, Program Mode (default start-up mode of the LS6)

and Live Mode, which can be selected from the "Live/Prog" button on the front of

the LS6. In this section we will review each mode and its features.

Program Mode:

In Program mode, you can create, save, edit and recall up to 36 custom patches

that are arranged into 6 banks. When in Program mode, the LED display will show

the letter "P" before the selected bank and patch numbers. For example, if bank 3

patch 5 is selected, the display will read P-3-5.

To create a Patch in Program mode:

• First, navigate to the bank and patch you would like to edit using

the footswitches

– Simultaneously press footswitches 1 + 2 to navigate down a bank, 3 +

4 to navigate up a bank, then an individual footswitch numbered 1-6 to

select the patch within that bank.

– Once on the chosen patch, hit the Edit/Save footswitch once. This

engages edit mode and the LED display will show the letter "E" followed

by the selected bank and patch numbers. For example, if bank 1 patch 1

is selected then the display will now read E-1-1.

– Now use footswitches 1-6 to turn on or off the loops you would like

arranged in the selected patch.